Maintenance - Billy Goat SC181HGEU Owner's Manual

Maintenance

Note: Item numbers in ( ) will be referenced in the Parts Illustration and Parts List on pages 11-20.
Periodic Maintanence
Maintenance operation to be performed at
every indicated month or operating hour,
whichever comes first.
Check engine oil (Add if necessary)
Engine Oil
Change engine oil
Check Air Filter (Clean if necessary)
Clean air filter
Air Filter
Replace air filter
Lubricate chains
Chains
Check chains for tension
Check and adjust
sparkplug
Spark Plug
Replace sparkplug
Replace cutting blade (If worn past 2.00"
wide limit)
Blade
Sharpen cutting blade
Check traction belts
Belts
Replace traction belts
Grease upper Pinion Bearing on Gear-
box (Use MOBOLITH SHC 220 grease or
equivalent)
Grease jackshaft bearings
Inspect for loose, worn or damaged parts
Check rear caster rod
Check for excessive vibration
Inspect drive cables for wear (adjust if
necessary)
Note: Blade, drive belts, and chains are normal wear items. See Fig. 11 for Chain configuration. These should
be inspected on a regular basis and replaced if worn. Also see your Billy Goat Dealer for servicing your
machine.
Part No. 373507
Every Every Every
Use 25 Hrs 50 Hrs
•
•
•
•
•
•
•
•
10
Every Every Every
100 Hrs 200
Hrs
•
•
•
•
•
•
•
•
300
Hrs
•
•
373507_A_HI