Configuring The Handset; Setting Do Not Disturb; Setting Call Forwarding - VTech ErisTerminal VSP600A User Manual

Configuring the Handset

You can configure the phone using one of two methods:
1. The Features and User settings menus on the phone.
2. The WebUI, which you access using your Internet browser.
This section describes settings you can change using your
handset. For information about settings you can change on the
WebUI, see "WebUI" on page 40.
The system administrator can configure additional settings,
including Network settings, Provisioning, and the PIN code by
using the Admin settings menu. For more information about
this menu, see the VSP600A/VSP601A Administrator and
Provisioning Manual.

Setting do not disturb

When Do Not Disturb (DND) is on for a line, calls to that line will
be rejected.
To turn DND on or off:
1. Press MENU.
2. Press to scroll to Features and press SELECT.
q
3. With DND highlighted, press SELECT.
4. Press p or q to select which line DND should apply to*,
then press SELECT to turn it on or off.
5. Press
SET
* Note that DND will apply to all handsets assigned the line.

Setting call forwarding

Calls can be forwarded to another phone number always, only when busy, or
after a set number of rings.
To set call forward:
1. Press MENU.
2. Press to scroll to Features and press SELECT.
q
to scroll to Call forward and press SELECT.
3. Press
q
4. Press p or q to select which line Call forward should apply to*, then press
SELECT.
5. Press to highlight the desired option:
q
• Always
• Busy
• No answer
6. Press SELECT.
to save.
34