Deregistering The Handset - VTech ErisTerminal VSP600A User Manual

Deregistering the handset

Before using the handset with a different base station, you must deregister the
handset from the base station to which it is currently registered.
To deregister the handset:
1. Press MENU on the handset. The Main Menu appears.
2. Press to scroll to User settings and press SELECT.
q
to scroll to Registration and press SELECT.
3. Press
q
4. Press to highlight Deregistration and press SELECT.
q
The handset screen displays a list of registered handsets.
5. Highlight the name of the handset you want to deregister, and
then press
SELECT
6. On the base station, press the HANDSET LOCATOR button
for at least four seconds, then release the button. Both LEDs
on the base station begin to flash.
7. On the handset, enter the System PIN and then press
SELECT to begin deregistration.
The deregistration process takes up to 10 seconds to complete. When the
handset deregisters, it beeps and the screen displays Unregistered.
Note: The handset enters an energy-saving charging mode after being
deregistered. All cordless telephone functions except handset-battery charging
are disabled. Energy-saving charging mode is deactivated after the handset
registers to the base station.
.
The default PIN is 0000.
22
Registration
Handset
Deregistration
BACK SELECT
Deregistration
HANDSET 1
HANDSET 2
HANDSET 3
HANDSET 4
BACK SELECT