Renaming The Phone; Audio Settings; Adjusting The Volume; Setting The Ring Tone - Yealink DD Phone User Manual

Renaming the Phone

The will be named automatically if successfully registered to the base station. You can personalize the name.
1. Go to Menu > Basic Settings > Phone Name.
2. Edit the current name in the Phone Name field.
3. Confirm the action.

Audio Settings

You can change the basic audio settings on your phone.

Adjusting the Volume

You can adjust the volume of the ringer, media, and audio during a call.
Press the Volume key

Setting the Ring Tone

Ring tones are used to indicate the incoming calls.

Setting the Ring Tone for the External Calls

You can select a unique ring tone for the external calls so that you can identify callers when the phone rings.
1. Go to Menu > Basic Settings > Sound > Ring Tones > Common.
2. Select the desired ring tone.
The ring tone is played automatically.
3. Confirm the action.

Maintaining Your Phone

When your phone cannot operate properly, you need to investigate or troubleshoot issues along with other tasks that
your administrator may ask you to perform.

Restarting the Base Station

The improper operation may cause malfunction. If a malfunction occurs, your system administrator may ask you to
restart the base station to refresh the settings.
Go to Menu > Advanced Settings (default PIN: 0000) > Reboot Config > Base Reboot.
After the above steps, the registration LED and network status LED on the base station go out simultaneously. After a
period of time, the LED indicators will glow green again when the base station restarts successfully.
.
| Audio Settings | 29