Yealink W56P Manual
  1. Manuals
  2. Brands
  3. Yealink Manuals
  4. IP Phone
  5. W56P Telesystem
  6. Manual
Yealink W56P Manual

Yealink W56P Manual

Ip dect phone
Hide thumbs Also See for W56P:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Quick Reference Manual
Yealink W56P IP DECT Phone Release Notes of Version
80

Table of Contents

Yealink W56P IP DECT Phone Release Notes of Version 80 ....................................................... 1
Yealink W56P IP DECT Phones Release Notes of Version x.80.0.15 ............................................ 2
1.
Introduction .............................................................................................................................. 2
2.
New Features ............................................................................................................................ 2
3.
Optimization .............................................................................................................................. 2
4.
Bug Fixes .................................................................................................................................... 2
5.
New Features Descriptions ....................................................................................................... 3
6.
Optimization Descriptions ......................................................................................................... 5
7.
Configuration Parameters Enhancements ................................................................................ 6
Yealink W56P IP DECT Phone Release Notes of Version 25.80.0.10 ......................................... 15
1.
Introduction ............................................................................................................................ 15
2.
New Features .......................................................................................................................... 15
3.
Optimization ............................................................................................................................ 15
4.
Bug Fixes .................................................................................................................................. 16
5.
New Features Descriptions ..................................................................................................... 16
6.
Optimization Descriptions ....................................................................................................... 23
7.
Configuration Parameters Enhancements .............................................................................. 33
YEALINK NETWORK TECHNOLOGY CO.,LTD.
1
www.yealink.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W56P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Yealink W56P

Summary of Contents for Yealink W56P

  • Page 1: Table Of Contents

    Yealink W56P IP DECT Phone Release Notes of Version Table of Contents Yealink W56P IP DECT Phone Release Notes of Version 80 ............1 Yealink W56P IP DECT Phones Release Notes of Version x.80.0.15 ..........2 Introduction ..........................2 New Features ..........................

  • Page 2: Yealink W56P Ip Dect Phones Release Notes Of Version X.80.0.15

     Release Date: July 14 , 2016. Note: Yealink W56P IP DECT Phone uses the same base station with W52P IP DECT Phone. If the base is upgraded from V73 to V80, it can be used with both W56H and W52H, but the newly added features in V80 base only apply to W56H.

  • Page 3: New Features Descriptions

    YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com 5. New Features Descriptions 1. Added the feature of RTCP-XR. Description: The RTCP-XR mechanism, complaint with RFC 3611-RTP Control Extended Reports (RTCP XR), provides the metrics contained in RTCP-XR packets for monitoring the quality of calls. These metrics include network packet loss, delay metrics, analog metrics and voice quality metrics.
  • Page 4 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com Description: IPv6 is developed by the Internet Engineering Task Force (IETF) to deal with the long-anticipated problem of IPv4 address exhaustion. IPv6 uses a 128-bit address, consisting of eight groups of four hexadecimal digits separated by colons;...

  • Page 5: Optimization Descriptions

    = 6. Optimization Descriptions 1. Deleted two languages- Czech and Hebrew from W56P IP DECT phone. Description: The IP DECT phones support multiple languages. Languages used on the handset user interface and web user interface can be specified respectively as required.

  • Page 6: Configuration Parameters Enhancements

    YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com Handset Web User Interface French French German German Italian Italian Polish Polish Portuguese Portuguese Spanish Spanish Turkish Turkish Swedish Russian Russian 2. Optimized the feature of Screen Activation. Description: When the handset is under Screen Saver state or entering power-saving mode, press keys on the handset to activate related functions.
  • Page 7 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com 1-Enabled Note: It works only if the value of the parameter “voice.rtcp_xr.enable” is set to 1 (Enabled). It enables or disables the IP phone to send a session phone_setti quality report to the central ng.vq_rtcpxr.
  • Page 8 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com MOS-LQ value computed by the phone is less than or equal to 3.5, the phone will send a warning alert quality report to the central report collector. When the MOS-LQ value computed by the phone is greater than 3.5, the phone...
  • Page 9 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com _delay_thres milliseconds) that causes hold_warnin the phone to send a warning alert quality report to the central report collector. For example, if it is set to 500, when the value of one way delay computed by the...
  • Page 10 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com If it is set to blank, critical alerts are not generated due to one way delay. One-way delay includes both network delay and end system delay. It enables or disables the voice quality data of the last...
  • Page 11 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com It configures the IP address mode. network.ip_ 0-IPv4 IP Mode address_mo 0, 1 or 2 mac.cfg de = 1-IPv6 2-IPv4 & IPv6 It triggers the static IPv6 DNS feature to on or off. 0-Off 1-On...
  • Page 12 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com environment, you also need to make sure the value of parameter "network.ipv6_static_dns_e nable" is set to 1 (On). It configures the secondary IPv6 DNS server. Example: network.ipv6_secondary_dn 2026:1234:1:1:c3c7:c11c:54 47:23a6 network.ipv6 Note: It works only if the...
  • Page 13 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com ” is set to 1 (IPv6) or 2 (IPv4 & IPv6), "network.ipv6_internet_por t.type" is set to 1 (Static IP Address). configures IPv6 default gateway. Example: network.ipv6_internet_port. gateway 3036:1:1:c3c7:c11c:5447:23 network.ipv6 a6:255 IPv6 _internet_po IPv6 address Blank mac.cfg...
  • Page 14 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com provisioning server “192.168.1.25”, downloads the web theme file “theme.cfg”. It configures the access URL of web navigation bar file. The web navigation bar file should be compressed as a TAR file in advance and then place it to the provisioning server.

  • Page 15: Yealink W56P Ip Dect Phone Release Notes Of Version 25.80.0.10

     Release Date: April 15 , 2016. Note: Yealink W56P IP DECT Phone uses the same base station with W52P IP DECT Phone. If the base is upgraded from V73 to V80, it can be used with both W56H and W52H, but the newly added features in V80 base only apply to W56H.

  • Page 16: Bug Fixes

    YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com 2. Merged the audio codecs iLBC_13_3 and iLBC_15_2 into iLBC. 3. Optimized the call display features. 4. Optimized the display method on dialing. 5. Added the feature of SCA. 6. Optimized the feature of End Call on Hook.
  • Page 17 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com Yealink IP Dect Phones Adminstrator Guide_V80_10 Yealink IP Dect Phones Description of Configuration Parameters in CFG Files_V80_10 6. Added the feature of specifying the default input method when the user searches for contacts on W56H.
  • Page 18 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com 8. Added the feature of Location in Time Zone module. To set the location via web user interface: Click on Settings -> Time & Date. The parameters in the auto provision template are described as follows: local_time.time_zone_name =...
  • Page 19 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com server redundancy for account registration. In the latest version, you can use Outbound Proxy Server when registering an account via web user interface. To configure this feature via web user interface: Click on Account -> Register The parameters in the auto provision template are described as follows: account.X.backup_outbound_host =...
  • Page 20 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com The parameters in the auto provision template are described as follows: phone_setting.missed_call_power_led_flash.enable = phone_setting.common_power_led_enable = phone_setting.ring_power_led_flash_enable = phone_setting.mail_power_led_flash_enable = 11. Added the feature of Dial-now. Description: You can configure one or more dial-now rules (up to 100) on your handset.
  • Page 21 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com dialplan.dialnow.rule.X = dialplan.dialnow.line_id.X = dialplan_dialnow.url = phone_setting.dialnow_delay = 12. Added the support for TLS authentication of SHA256 algorithm. Description: Supported the newest algorithm to realize mutual authentication. 13. Added the feature of LDAP. Description: LDAP (Lightweight Directory Access Protocol) is an application protocol for accessing and maintaining information services for the distributed directory over an IP network.
  • Page 22 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com ldap.enable = ldap.name_filter = ldap.number_filter = ldap.host = ldap.port = ldap.base = ldap.user = ldap.password = ldap.max_hits = ldap.name_attr = ldap.numb_attr = ldap.display_name = ldap.version = ldap.call_in_lookup = ldap.ldap_sort = ldap.call_out_lookup = ldap.incoming_call_special_search.enable = ldap.tls_mode = 14.

  • Page 23: Optimization Descriptions

    YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com the placed calls list when the phone is on the pre-dialing screen. To configure search source list in dialing via web user interface: Click on Directory -> Setting. The parameters in the auto provision template are described as follows: super_search.recent_call =...
  • Page 24 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com The parameters in the auto provision template are described as follows: account.X.sip_server.Y.transport_type = (2) Changed the configuration items- SIP Session Timer and SIP Port under the Account -> Advanced into Setting -> SIP, and the parameters have also changed.
  • Page 25 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com sip.listen_port = (3) Changed the configuration items under the Account -> Basic into Account -> Register. (4) Divided the Phone interface into two interfaces- Features and Setting. 4. Merged the audio codecs iLBC_13_3 and iLBC_15_2 into iLBC.
  • Page 26 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com a per-line basis via web user interface: Click on Account -> Codec. 5. Optimized the call display features. Description: (1) You can enable or disable the handset to display the called account information when receiving an incoming call.
  • Page 27 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com required. IP DECT phones support three account information display methods: Label, Display Name or User Name. The parameters in the auto provision template are described as follows: features.display_method_on_dialing = 7. Added the feature of SCA.
  • Page 28 IP DECT phone for account X. Description: You can use the parameter account.X.custom_ua = to configure the suffix of User-Agent in SIP request messages. Default value of User-Agent: Yealink W52P 25.80.0.10. If it is set to Myphone, the User-Agent appears as below: Yealink W52P 25.80.0.10 Myphone.
  • Page 29 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com To stop this from happening, you also need to disable allow IP call feature. In the latest version, you can enable this feature via web user interface. To configure accept SIP trust server only feature via web user interface: Click on Features ->...
  • Page 30 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com The parameters in the auto provision template are described as follows: auto_provision.attempt_expired_time = 13. Optimized the feature of call timeout. Description: Call timeout defines a specific period of time within which the IP DECT phone will cancel the dialing if the call is not answered.
  • Page 31 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com 16. Optimized the feature of exporting the log files to the local system and added one method for exporting System Log. Description: You can configures the IP DECT phone to export log files to the local system, syslog server or an FTP/TFTP Server (provisioning server).
  • Page 32 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com The parameters in the auto provision template are described as follows: syslog.log_upload_period = syslog.ftp.post_mode = syslog.ftp.max_logfile = syslog.ftp.append_limit_mode = syslog.bootlog_upload_wait_time = 17. Optimized the feature of STUN. Description: In the latest version, you can configure the STUN server address for all the accounts at once instead of configuring each account one by one.

  • Page 33: Configuration Parameters Enhancements

    YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com The parameters in the auto provision template are described as follows: sip.nat_stun.server = sip.nat_stun.port = 7. Configuration Parameters Enhancements Auto Provision Template Flies Change Log Firmware Version：[25.73.0.40]-[25.80.0.10] Provisioning syntax Comparison Permitted Default Feature Action Description File 25.73.0.
  • Page 34 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com _Call Park park.park_m mode. 0-XSI 1-FAC It enables or disables the IP DECT phone to display the Broadsoft features.call_ Park soft key during a call. 0 or 1 MAC.cfg _Call Park park.enable 0-Disabled 1-Enabled It enables or disables the IP DECT phone to display the features.call_...
  • Page 35 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com Note: It works only if the value of the parameter “features.call_park.park_mo de” is set to 1. It configures the group call park code for Gpark soft key when call park mode is features.call_ Broadsoft String within configured as FAC.
  • Page 36 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com incoming call. 0-Disabled (handset power indicator LED does not flash) 1-Enabled (handset power indicator LED fast flashes (300ms) red) It enables or disables the handset power indicator LED to flash when the handset receives a voice phone_settin mail.
  • Page 37 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com It configures the access URL of the dial-now rule template file. Example: dialplan_dialnow.url = http://192.168.10.25/dialno URL within dialplan_dial common. w.xml Dialplan Blank now.url During the auto provisioning characters process, the IP DECT phone connects to the provisioning server “192.168.10.25”, and...
  • Page 38 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com Example: ldap.name_filter = (|(cn=%)(sn=%)) When the cn or sn of the LDAP contact starts with the entered prefix, the record will be displayed on the LCD screen. It configures the search criteria for LDAP contact numbers look up.
  • Page 39 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com of the LDAP phonebook from which the LDAP search request begins. The search base narrows the search scope and decreases directory search time. Example: ldap.base = dc=yealink,dc=cn It configures the user name used to login the LDAP server.
  • Page 40 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com down the LDAP search speed, therefore it should be configured according to the available bandwidth. Example: ldap.max_hits = 50 It configures the name attributes of each record to be returned by the LDAP server. It compresses the search results.
  • Page 41 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com ldap.display_name = %cn The cn of the contact record is displayed on the LCD screen. It configures the LDAP protocol version supported by the IP DECT phone. Make common. LDAP ldap.version 2 or 3 sure the protocol value...
  • Page 42 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com to TFTP Server) If it is set to 1 (Post Append), the log files on the provisioning server are appended. If it is set to 2 (Post Stor), the log files on the provisioning server are overwritten.
  • Page 43 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com Note: It works only if the value of the parameter “syslog.mode” is set to 2 (FTP/TFTP Server). It configures the IP DECT phone to export log files to the local system or the syslog.mo common.
  • Page 44 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com timer_t2 account X. Timer T2 represents the maximum retransmitting time of any SIP request message. It configures the SIP session timer T4 (in seconds) for account.X. account X. Float from 2.5 common. advanced. sip.timer_t4 Change...
  • Page 45 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com It enables or disables the IP DECT phone to only accept the SIP message from the account.X. common. SIP and outbound proxy sip_trust_ sip.trust_ctrl 0 or 1 Change server. ctrl 0-Disabled 1-Enabled It configures the account...
  • Page 46 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com the corresponding input method is enabled via the handset at the path: OK->Settings->Display->Inpu t Method. It enables or disables the handset to display the called phone_settin contact information when it Call g.called_part common. 0 or 1 receives an incoming call.
  • Page 47 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com phone. Example: call_waiting.off_code = *72 It configures the call waiting on code to activate the server-side call waiting feature. The IP DECT phone will send the call waiting on Call call_waiting.o String within common. Blank...
  • Page 48 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com 1-# key 2-* key If it is set to 0 (Disabled), neither “#” key nor “*” key can be used as the send key. If it is set to 1 (# key), the pound key is used as the send key.
  • Page 49 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com LDAP search when placing a call. 0-Disabled 1-Enabled It enables or disables the IP DECT phone to search the telephone numbers starting with ”+” symbol and “00” from the LDAP server if the incoming phone number starts with”+”...
  • Page 50 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com phone. 0-LDAP—Unencrypted connection between LDAP server and the IP DECT phone (port 389 is used by default). 1-LDAP TLS Start—TLS/SSL connection between LDAP server and the IP DECT phone (port 389 is used by default).
  • Page 51 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com 64:70:02:9E:D6:92 Note: It has a higher priority than the value defined by the parameter "network.dhcp.server_mac2 ". It configures the MAC address 2 that the IP DECT phones use to authenticate the DHCP server. If the...
  • Page 52 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com VLAN assignment method or disable the VLAN feature when the IP DECT phone cannot obtain VLAN ID using the current VLAN assignment method. 0-Disabled 1-Enabled The priority of each method is: LLDP/CDP>Manual>DHCP VLAN. If it is set to 1 (Enabled), the...
  • Page 53 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com can see the placed calls list when the handsete is on the pre-dialing screen. 0-Disabled 1-Enabled It configures the access URL of the super search template file. Example: super_search.url = http://192.168.1.20/super_s URL within Super_sea super_search common.
  • Page 54 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com from 1 to server for account X. Example: account.1.xsi.port = 80 It configures the access protocol of the Xtended Broadsoft Services Platform server for XSI (X “http” or xsi.server_ account.X.xsi. account X. ranges http Change MAC.cfg...
  • Page 55 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com sh.js During the auto provisioning process, the IP DECT phone connects to the HTTP provisioning server “192.168.10.25”, and downloads the language pack “1.English.js”. The English language translation will be changed accordingly if you have modified the language template file.
  • Page 56 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com the registration lease. Advanced account.X.su It configures the renewal (X ranges Positive bscribe_expir time (in seconds) away from MAC.cfg from 1 to integer es_overlap the subscription lease. It enables or disables the Refer -To header to use the...
  • Page 57 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com during a SCA call. 0-Disabled 1-Enabled It enables or disables the IP DECT phone to forward incoming calls to Forward forward.inter common. international numbers (the Internatio national.enab 0 or 1 prefix is 00). 0-Disabled 1-Enabled...
  • Page 58 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com interface. It configures the characters the IP DECT phone filters when dialing. If the dialed number contains configured characters, the IP DECT phone will automatically filter these characters when dialing. Example: features.call_num_filter Features_ features.call_ String within common.
  • Page 59 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com built-in key (e.g., key1). The IP DECT phone then decrypts the encrypted configuration files using corresponding key (e.g., key2, key3). If it is set to 0 (Disabled), the IP DECT phone will decrypt the encrypted configuration...
  • Page 60 YEALINK NETWORK TECHNOLOGY CO.,LTD. www.yealink.com Note: It has a higher priority than the value defined by the parameter “network.attempt_expired_ time”.

Table of Contents