Mitsubishi Electric FR-A760 Series Instruction Manual page 239

Function assignment of external terminal and control
(2) Inverter operation ready signal (RY, RY2 signal) and inverter running signal (RUN, RUN2,
RUN3 signal)
Under V/F control, advanced magnetic flux
vector control
Power ON
supply
ON
STF
RH
Pr. 13
Starting
frequency
Reset
processing
ON
RY
RUN
(RUN2)
ON
RUN3
Inverter
Start
Status
Signal is Signal is
OFF
(during (during
Output
stop)
Signal
RY ON
RY2 OFF
RUN OFF
RUN2 OFF
RUN3 OFF
*1 This signal turns off during power failure or undervoltage.
228
OFF
OFF
ON
DC injection brake
operation point
DC injection
brake
operation
Time
OFF
ON
OFF
OFF
Start Start
Signal is Under DC
ON ON Injection
(during Brake
stop) running)
ON ON ON
OFF OFF OFF
OFF ON OFF
OFF ON OFF
ON ON ON
⋅ When the inverter is ready to operate, the output of the
operation ready signal (RY) is on. (It is also on during inverter
running.)
⋅ When the output frequency of the inverter rises to or above
Pr. 13 Starting frequency, the output of the inverter running
signals (RUN, RUN2) is turned on. During an inverter stop or
DC injection brake operation, the output is off.
⋅ For the RUN3 signal, output is on while the inverter running
and the start signal is on.
(For the RUN3 signal, output is on if the starting command is
on even when the inverter protective function is activated or
the MRS signal is on.)
The output is on during DC injection brake operation and off
during an inverter stop.
At Alarm Occurrence
or MRS Signal is on
(output shutoff)
Start signal Start signal
is ON is OFF
OFF
OFF
OFF
OFF
ON OFF
Automatic Restart after
Instantaneous Power Failure
Coasting
Restarting
Start signal Start signal
is ON is OFF
ON
*1
OFF
OFF
OFF
ON OFF
ON
OFF
ON
ON
ON