ICP DAS USA GW-2200 Series Quick Start Manual page 7

1) Enter the password in the login password field and click "Submit".

2) Click the "Port1" tab to display the "Port1 Settings" page.
3) Select the appropriate Baud Rate, Data Format and Modbus Protocol
(e.g., 19200, 8N2 and Modbus RTU) from the relevant drop down options.
Note: The Baud Rate, Data Format and Modbus protocol settings
depends on your Modbus device.
4) Click "Submit" to save your settings.
Technical support:
Use the default
password: admin


service@icpdas.com


P7