Configuring Network Settings - ICP DAS USA GW-2200 Series Quick Start Manual

5

Configuring Network Settings

1) Double-click the eSearch Utility shortcut on the desktop.
2) Click the "Search Servers" to search your GW-2200.
3) Double-click the name of GW-2200 to open the "Configure Server
(UDP)" dialog box.

Factory Default Settings of GW-2200:
IP Address
Subnet Mask
Gateway
4) Contact your Network Administrator to obtain a correct network
configuration (such as IP/Mask/Gateway). Enter the network settings
and click "OK".
seconds later.
Technical support:


192.168.255.1
255.255.0.0
192.168.0.1
Note: The GW-2200 will use the new settings 2

service@icpdas.com P5