Ftp/ Email - ICP DAS USA GRP-540M Series User Manual

3.7.3 FTP/ Email

This function will send back all I/O data log file automatically. The period time to send is
depending on "Max. Time per Log File (min.)" parameter.
(1) Data Log Interval (sec.): the time interval to record I/O data to logger file. Set as "0" to
disable all function in this tab.
(2) Max. Time per Log File (min.): the time interval to change log file and send log file via
Email or FTP. it will change logger file before the file be over 3 MB, and move old logger
file into "LOGFILE" folder, and send out the file at the same time.
If you enable FTP or Email function, it will copy old log file into "FTP_UPLOAD" and
"MAIL_UPLOAD" for sending out files.
If send FTP or Email logger file fails, it will send files next time.
(3) FTP Server Address: FTP Server IP or Domain Name.
GRP-530M / GRP-540M User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved
Version 1.2.1
E-mail: service@icpdas.com
43
Page：