Rtu Client - ICP DAS USA GRP-540M Series User Manual

3.6 RTU Client

The user can configure RTU Client function here. The RTU Client function will connect to RTU
Center, please refer the website for more information.
3.6.1 RTU Client
The user can configure RTU Client firmware function here. There are three tabs:
(1) Main Info. (2) Modbus Number (3) FTP/Email
◼ Main Info. Tab:
(1) Server Address: Server IP or Domain Name.
(2) Server Port: the port of the server.
(3) Station ID: the ID for this device. (do not be the same with other RTU device)
(4) Data Update Period (sec.): set report time interval. The device will report all data to
RTU Center every interval time your setting.
(5) Heartbeat Period (sec.): set heartbeat time interval. 3G/GPRS connection will be
GRP-530M / GRP-540M User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved
Version 1.2.1
E-mail: service@icpdas.com
34
Page：