1. Introduction The GRP-530M / GRP-540M provided by ICP DAS is a 3G/4G gateway for Ethernet or serial port. With GPS function, it can also be a GPS tracking system. It can be used in M2M application fields to transfer the remote I/O, Modbus data or video of the camera via 3G/4G. Within the high performance CPU, the it can handle a large of data and are suit for the hard industrial environment.
B. 9 : Factory default IP. If you set as 9, and then reset the device, its Ethernet IP will be “192.168.255.1”. If you forgot your device IP, you can use this function to re-configure your device IP. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 21
(5) Mask: if use Static mode, set Mask of this Wi-Fi station. (6) Gateway: if use Static mode, set Gateway of this Wi-Fi station. (if already have default gateway for 3G/4G, the default gateway for Wi-Fi station will be deleted) GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
(1) Server IP: the target IP or URL that you want to send signal (ping the target IP). (2) Max. Retry: if the system retry time is over this number, it will reset 3G/4G modem and GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
(3) Timezone: if you do not know your timezone, please click the link “check timezone” to find out. (4) Enable NTP Function: if you enable it, the device will update time automatically. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
(4) Device ID: ID of the device. If you set it as “1”, you will find that “visual IP” is “127.53.0.1” on the server side. (5) Alias: an alias of device. Max. length is 8 characters. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
(4) Data Update Period (sec.): set report time interval. The device will report all data to RTU Center every interval time your setting. (5) Heartbeat Period (sec.): set heartbeat time interval. 3G/GPRS connection will be GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 36
(2) Max. Time per Log File (min.): the time interval to change log file and send log file via Email or FTP. it will change logger file before the file be over 3 MB, and move old logger GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
(5) CAN ID: the ID of the CAN message that you want to catch. (6) CAN data index: Max CAN message length is 8 (range is 0~7), the user can choose an index data fill into AI field of RTU. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 50
(8) If you want to see the IP Camera image from web browser, please type the IP address or domain name of GRP device in 3G/4G network. (It may be like “mygrp5k.no-ip.org:12180”.) GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
This example shows how to use RTU API to collect and control remote Modbus/RTU and Modbus/TCP I/O with RTU Client / Server. There are ET-7017, M-7045, and a PLC in this system. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 67
If the result is successful, the screenshot will be as below, and please follow next step. If result is fail, the screenshot will be as below. Please check your settings or the wire connection. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 69
⚫ Input the alias name of your device ⚫ Choose module type as “GRP-520” (no this item in new version RTU Center) ⚫ Set Station ID as “1”, and then press “OK” button. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 70
(14) GRP device will connect to RTU Center later, and screenshot as below. (15) You can double click on “ET-7050” to bring out “Output control panel”, and press “DO1” to control remote DO. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 72
(17) Copy pre-building demo into folder of RTU Center. (demo must be in the same folder with RTU Center, because they use the same share memory in M2M_RTU.dll) Here we copy two file “RTU_CS_demo.exe” and “M2M_RTU_NET.dll” from C# demo. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
Page 75
(5) You can double click on device node to modify device name. (6) Now you can use OPC Client to read I/O data from NAPOPC.M2M DA Server. Or you can client “Monitor” to monitor all I/O data. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...
⚫ If you need Email report function, please set all Email parameters and set “Enable FTP Function” as “Enable”. If you need 2 or more contact, please use comma “,” to separate each contact. GRP-530M / GRP-540M User Manual Version 1.2.0 Page:...