Table of Contents
Advertisement
4.3 Remote I/O Control / Temperature Monitor
This example shows remote control application via "serial port to 3G/4G gateway function".
(1) Please connect your device (DL-100 or PLC) to serial port of GRP device:
(2) If you never use VxServer, please refer the link as below:
http://m2m.icpdas.com/VxServer.html
you need download VxServer software and VxComm software, and install it on your
control center.
(3) Set Pin code of your SIM card, and Enable "Auto-Dialing" function.
Set "User Name" and "Password" if your SIM card needs it.
Press "Modify"
GRP-530M / GRP-540M User Manual
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved
Version 1.2.1
E-mail: service@icpdas.com
52
Page：
Advertisement
Table of Contents
