Email Or Ftp Report I/O Logger File - ICP DAS USA GRP-520 User Manual

4.8 Email or FTP report I/O logger file.

This example shows how to using GRP-520 to report I/O logger file periodically.
(1) About Modbus configure, please refer
(2) Configure Email / FTP function in "Email/FTP" Tab.
field more than 0, or log report function will be
 Configure "Data Log Interval" to record IO data into csv file. (0  disable)
filename format: GRP-520_StationID_YYYYMMDD_hhmmss.csv
ex: GRP-520_13_20140806_172347.csv
 Configure "Max. Time per Log File" to indicate how long to change / send back log file.
If the file size is close 3MB, GRP-520 will create a new log file to recode I/O data and
move old log file into "/RTU/LOGFILE/" in SD card.
 If you need FTP report function, please set all FTP parameters and set "Enable FTP
Function" as "Enable". GRP-520 will send log file to FTP Sever when new log file is
available.

If you need Email report function, please set all Email parameters and set "Enable FTP
Function" as "Enable".
each contact.
section 4.5.
If you need 2 or more contact, please use comma "," to separate
74
GRP-520 User Manual, V1.30, Aug. 2015
You must set "Data Log Interval"
disabled. (include FTP and Email)