Entering Programming Mode; Exiting Programming Mode - Rosslare AYC-E/Q60 Series Instruction Manual

Reader Functionality
5.2.1

Entering Programming Mode

To enter Programming mode:
1. Press the # key 4 times.
Transmit LED turns off.
Program LED turns red.
2. Enter your 4-digit Programming
code.
If the Programming code is
valid, the door LED turns green
and the AYC-E/Q60 is in
Programming mode.
•
The factory 4-digit Programming code is 1234.
•
If a Programming code is not entered within 30 seconds, the
AYC-E/Q60 returns to Transmit mode.
5.2.2

Exiting Programming Mode

To ex it Programming mode:
1. Press the # key.
You hear a beep.
The Program LED is off.
The Transmit LED turns red.
This indicates that the AYC-E/Q60 has returned to Transmit
mode.
Wrong entries may reset the reader back to Transmit mode.
While in Programming mode, if no key is pressed for 30 seconds,
the AYC-E/Q60 exits Programming mode and returns to Transmit
mode.
AYC-E/Q60 Family Instruction Manual
Mode/Transmit
Mode/Transmit
Mode/Transmit
Red
Door/Program
Red
Door/Program
Green
Door/Program
23