Perkins 2506J-E15TA Operation And Maintenance Manual page 72

Industrial
Table of Contents

Advertisement

72
Maintenance Section
Refill Capacities and Recommendations
• The Oil Condition Analysis determines the loss of
the oils lubricating properties. An infrared analysis
is used to compare the properties of new oil to the
properties of the used oil sample. This analysis
allows technicians to determine the amount of
deterioration of the oil during use. This analysis
also allows technicians to verify the performance
of the oil according to the specification during the
entire oil change interval.
Refill Capacities and
Recommendations
Refill Capacities
Lubricant Refill Capacity
Illustration 58
Standard pan
Illustration 59
Center pan
Illustration 60
Deep pan
i06937316
The refill capacities for the engine crankcase reflect
the approximate capacity of the crankcase or sump
plus standard oil filters. Auxiliary oil filter systems will
require extra oil. Refer to the OEM specifications for
the capacity of the auxiliary oil filter.
Table 14
Oil Sump
Standard pan
Center pan
Deep pan
(1)
These values are approximate capacities for the crankcase oil
sump which include the standard oil filters that are installed at
the factory. Engines with auxiliary oil filters will require extra oil.
Refer to the OEM specifications for the capacity of the auxiliary
oil filter.
Coolant Refill Capacity
To maintain the cooling system, the total cooling
system capacity must be known. The capacity of the
total cooling system will vary. The capacity will
g02300456
depend on the size of the radiator (capacity). Table
15 should be completed by the customer for the
maintenance of the cooling system.
Table 15
Approximate Capacity of the Cooling System
Compartment or
System
Total Cooling System
(1)
(1)
The total cooling system capacity includes the following compo-
g02300473
nents: The engine block, the radiator, and all coolant hoses and
lines.
Recommendation
Refer to this Operation and Maintenance Manual,
"Fluid Recommendations" for information about the
fluids which are acceptable for this engine.
2000 Series Industrial Engines
Approximate Refill Capacities
Engine with 1
(1)
Filter
34 L (36 qt)
60 L (63 qt)
68 L (72 qt)
Liters
M0076814-03
g02300474
Engine with 2
Filters
43 L (45 qt)
62 L (66 qt)
70 L (74 qt)
Quarts

Advertisement

Table of Contents
loading

This manual is also suitable for:

2506f-e15ta

Table of Contents