Security Service - HIKVISION DS-2CD6D52G0-IHS(2.8mm) User Manual

(3) Click the OK to finish modifying.
Delete an IP Address or IP Addresses.

Select the IP address(es) and click Delete.
5. Click Save to save the settings.

6.4.3 Security Service

Purpose:
To enable the remote login, and improve the data communication security, the camera
provides the security service for better user experience.
Note: Only certain camera models support the function.
Steps:
1. Enter the security service configuration interface: Configuration > System >
Security > Security Service.
2. Check the checkbox of Enable Illegal Login Lock.
Illegal Login Lock: it is used to limit the user login attempts. Login attempt from the
IP address is rejected if admin user performs 7 failed user name/password
attempts (5 times for the operator/user).
Note: If the IP address is rejected, you can try to login the device after 30 minutes.
Network Camera User Manual
Modify an IP
Security Service
64