Sony DME-7000 Maintenance Manual page 38

1-10. Installation of Optional Boards
1-10-2. MPU-80 Board (BKDM-7031)
Installation
Connect the MPU-80 board to the MPU-72 board accord-
ing to the following procedures.
1. Align the component markings on the MPU-80 board
with component markings on the MPU-72 board.
2. Connect the connectors while pressing the connector
portions on the MPU-80 board to the connectors on the
MPU-72 board.
n
Make sure that the connectors are connected tightly. If
the connectors cannot be connected completely, the
board may be placed in the other way.
MPU-80 board
MPU-72 board
1-30 (E)
1-10-3. WKG-16 Board (BKDM-7041)
Connect the WKG-16 board to the WKG-13 board accord-
ing to the following procedures.
1. Align the four marks on the WKG-16 board with
component markings on the WKG-13 board.
2. Connect the connectors while pressing the connector
portions on the WKG-16 board to the connectors on
the WKG-13 board.
n
Make sure that the connectors are connected tightly. If
the connectors cannot be connected completely, the
board may be placed in the other way.
MPU-70 board
*The marks when installing the WKG-16 board to
WKG-13 board.
Installation
WKG-16 board
WKG-13 board
Marks
WKG-16 board
WKG-13 board
Marks
Marks
Marks