Download  Print this page

Sony DME-3000 Product Manual

Digital multi effects systems
Hide thumbs

Advertisement

Quick Links

SONy
DME-7000
DME-3000
Product Guide

Advertisement

Table of Contents
loading

  Also See for Sony DME-3000

  Related Manuals for Sony DME-3000

  Summary of Contents for Sony DME-3000

  • Page 1 SONy DME-7000 DME-3000 Product Guide...
  • Page 2 CONNECTION WITH THIS GUIDE, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony reserves the right to make any modification to this guide or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate end use license agreement.
  • Page 3: Table Of Contents

    DME-Series Components....................21 Basics ..........................21 Processor (DME-3000) ..................21 Processor (DME-7000) ..................21 Software and Manuals......................22 Operation Software and Manual (DME-3000) ............22 Operation Software and Manual (DME-3000) ............22 Contents • • i DME-3000/7000 • Product Guide...
  • Page 4 Spare Parts......................29 Training ..........................30 Training — General Product ................30 Order Guides ........................31 Instructions ......................31 DME-3000 Request Form..................32 DME-7000 Request Form..................33 DME Modification Kit....................... 34 DME Modification Kit ..................34 Installation Guide DME-3000/7000 Installation ..................... 35 DME-3000/7000 Control Panel..................
  • Page 5 DME-3000/7000 Control Panel Connectors ............... 48 Processor......................48 Monitor ........................ 49 Spare........................49 DME-3000/7000 System Interconnection Chart — Video ..........50 DME-3000/7000 System Interconnection Chart — Control..........51 DME-3000/7000 Stand Alone Configuration ..............52 DME-3000/7000 Interconnection with DVS-7000 Series ........... 53 Appendix A.
  • Page 6 SONY iv • • Contents DME-3000/7000 • Product Guide...
  • Page 7: Introduction

    Three different boxes? Three different control panels and user-interfaces? How about one, with the capability to handle all these requirements. Sony’s “DME” series of Digital Multi Effects devices provides the answer. Both the DME-3000 and DME-7000 deliver superb picture quality plus a wide variety of effects — with the advantage of one simple control panel, human interface, and operating style! To assist you with assembling the optimum DME system for your customer’s needs,...
  • Page 8 SONY • Chapter 2 — Configuration Guide This chapter provides itemized descriptions of DME-3000 and DME- 7000 features and options to assist with configuration planning. Two quotation request forms are included to simplify the ordering process. • Chapter 3 — Installation Guide This chapter offers information and diagrams to assist with facility engineering and equipment integration requirements.
  • Page 9: Features And Benefits

    This appendix provides tables and descriptions of many DME features. Note that some features described in the following sections may apply only when the Sony DME-3000 and DME-7000 are used with Sony DVS-7000 Series, DVS- 2000C, BVE-2000, and BVE-9100 systems.
  • Page 10: Talent, Creativity, And Quality

    — from simple fixes (transparent to the viewer), to remarkable “look at me” effects, ripe with creativity. One thing is clear, however — the decision to buy a DME-3000 or DME-7000 is not based exclusively on the number of tricks in the digital effects toolbox! ™...
  • Page 11: Dynamic Visual Effects

    Whether the operator is re-positioning a graphic, designing a spectacular multi-channel move, solving a visual problem, or bringing a complex storyboard to life, a DME must have the necessary tools at hand. Sony’s DME-series delivers, with a full range of 2-D and 3-D tools.
  • Page 12 The third mode (Target Spotlight) lights both the page and the turning edge of the image. With the benefit of the DME-3000’s lighting effects, the resulting image greatly increases the viewers perception of realism. The figure below illustrates the different video paths when each lighting mode is enabled.
  • Page 13: Dme-7000 Effects

    Explosion, Swirl, Multi-Mirror, Twist, and Kaleidoscope are provided. DME-7000 Effects The DME-7000’s toolbox adds even more creative effects: • Effect File Converter — An effect file converter is provided for effect interchangeability between DME-3000 and DME-7000 systems. • ™ Advanced Shadow Effects — With the BKDM-7070 board installed, more natural shadows can be created with precise 3-D positioning, perspective and depth defocus.
  • Page 14 BKDM- 7060 and BKDM-7070 boards installed. • Advanced Lighting Effects — Building on the DME-3000’s lighting capabilities (with two independent light sources), the DME-7000 adds advanced spot light effects (providing a total of three light sources).
  • Page 15: Key Channel Input

    Key Channel Input With the optional BKDM-3060 (for DME-3000) or BKDM-7060 (for DME-7000) installed, the DME-series processes externally supplied keys in parallel with the video. This option allows you fly key and fill signals supplied by external devices such as character generators and graphics systems.
  • Page 16: Keyframe Operation

    — 998 on the DME-7000 and 680 on the DME-3000. Once created, effects can be stored in up to 99 registers (on both systems). And, because almost all digital effects require some degree of fine-tuning once they are programmed, a full complement of keyframe and motion path tools are available including linear, spline, smooth and step.
  • Page 17: Editor Interface

    Editor Interface To underscore Sony’s advanced systems integration, the DME-series can be serially controlled (just like a VTR) from the Sony BVE-2000, the BVE-9100, and editing systems from many other manufacturers. Taking control one step further, the BVE- 9100 system offers full keyframe control including keyframe modification.
  • Page 18: Multi-Channel Operation

    Input Source Control Input source control is the ability to change images on a keyframe-by-keyframe basis or on an edge switch. DME-3000 and DME-7000 can provide input source control through a variety of methods, for example, an internal A/B switch may be utilized.
  • Page 19: Configuration Guide

    SONY Configuration Guide DME-3000/7000 Configuration This chapter provides itemized descriptions of DME-3000 and DME-7000 features, configurations, and options. To assist with pre-sales planning and to simplify the ordering process, two quotation request forms (one for each product) are included. The following sections are provided: •...
  • Page 20: Product Differentiation

    SONY Product Differentiation The following table lists the primary feature differences between the DME-3000 and the DME-7000. DME-3000 / DME-7000 Product Differentiation Category / Feature DME-3000 DME-7000 Picture Quality Primary Input Processing Quantization 10-bits 10-bits Pixel x Pixel Interpolation 2 x 2...
  • Page 21: Configurations And Features

    • In the “DME Components” section, a component-by-component list is provided of the standard and optional items that comprise each product. All items are common to both products except where noted. Configuration Guide • • 15 DME-3000/7000 • Product Guide...
  • Page 22: Dme-3000 Product Configuration

    SONY DME-3000 Product Configuration The diagram below represents a fully-configured DME-3000 system. Note: Board "locations" as shown VGA Monitor do not represent the actual (Recommended) chassis locations. Microsoft Serial Mouse Version 2 (Recommended) DME-3000 Processor BKDM-3010 Control Panel BZDM-3020 Software...
  • Page 23: Dme-3000 Features Per Board

    SONY DME-3000 Features per Board The chart below lists the boards that are required for specific DME-3000 features. DME-3000 Features per Optional Board Configurations DME-3000 + BKDM-3010 + BZDM-3020 Required Optional Board (BKDM-): 302x 7020 3030 7031 3040 7041 3050...
  • Page 24: Dme-7000 Product Configuration

    BKDM-3023 Digital (4:2:2), and Analog Component I/O Board BKDM-7020 Digital (4:2:2 or 4fsc), switchable I/O Board Note: customer may purchase multiple I/O boards, but only one board can be installed at a time. 10. BKDM-7021 CCR (Piggyback) 18 • • Configuration Guide DME-3000/7000 • Product Guide...
  • Page 25: Dme-7000 Features Per Board

    4fsc or 4:2:2 Digital Input Capability Video Defocus Mach Noise Cancel Video Blur Masking Duality 3021/ 3023 Duality “Sub” Channel Video Effects Duality “Sub” Channel Bevel Edge Color Correction Metallic Effects Assignable Frame Store (Utility) Configuration Guide • • 19 DME-3000/7000 • Product Guide...
  • Page 26 Spot Lighting / Target Spot Light Target Lighting Key and Recursive Effects External Key Key Border Key Defocus Page Turn using External Key Random, Rainbow Color Trail Recursive Effects Wind Effects, Dust Modify 20 • • Configuration Guide DME-3000/7000 • Product Guide...
  • Page 27: Dme-Series Components

    • The Operation Software BZDM-3020 or BZDM-3720 is required. • The DME-3000 system supports up to 2 channels. For a second channel, order a second DME-3000 processor. In the “Installation Guide” chapter, refer to the “DME-3000/7000 Chassis” section for a chassis diagram and list of chassis specifications.
  • Page 28: Software And Manuals

    (DME-3000 only) The BZDM-3020 Operation Software and Manual (English) is required for operation with the BKDM-3010 control panel, and for driving the DME-3000’s logical array of menus. The software is provided on floppy disk for insertion in the Control Panel’s floppy drive.
  • Page 29: Switcher Control Panel Configuration

    • When the BZDM-3720 operation software is installed to control the DME-3000, the BZDM-3020 software is not required — whether or not a BKDM-3010 panel is included in the system configuration. • When the BZDM-7720 operation software is installed to control the DME-7000, the BZDM-7020 software is not required —...
  • Page 30: Control Panels And Monitors

    Configuration” section for important information. Status Monitor A variety of SVGA status display monitors are available from Sony, such as the model CPD-15SF2 and the LCD display model LMD-1041. Due to the continuing improvement in monitor technology and the wide range of choices available for specific applications, refer to your Sony catalog or contact your Sony sales office for details on the current models available.
  • Page 31: Input Boards

    SONY Input Boards This section describes the optional input boards that can be added to a DME-3000 or DME-7000 system. Please note: • Each input board is compatible with both systems. • One input board is required for proper DME operation.
  • Page 32: Effects Boards

    SONY Effects Boards This section describes the optional effects boards that can be added to a DME-3000 or DME-7000 system. Refer to the “DME-3000 Features per Board” and “DME- 7000 Features per Board” sections for detailed lists of the boards that are required for specific DME-3000 and DME-7000 features.
  • Page 33: Key Channel/Recursive Effects Board

    Additional video effects for the Duality mode “sub” channel are also provided with the BKDM-7021. Sub channel effects include beveled edge, posterize, solarize, sepia, and monochrome. Configuration Guide • • 27 DME-3000/7000 • Product Guide...
  • Page 34: Peripherals

    SONY Peripherals This section describes the peripheral products that can be added to a DME-3000 or DME-7000 system. RCC- System Cables 5G, 10G, 30G The RCC-series cables provide RS-422 9-pin interconnects for serial controlled devices. Three lengths are available: •...
  • Page 35: Digital Signal Input Source Router

    Spare Parts When ordering replaceable parts such as printed circuit boards and major components, use the following names and part numbers: • CPU-114 Board, p/n A-8275-400-A (DME-3000) • CPU-196 Board, p/n A-8272-261-A (DME-7000) • DPR-35 Board, p/n A-8275-401-A (DME-3000) •...
  • Page 36: Training

    SONY Training This section describes training courses that are available for the DME-3000 and DME-7000 systems. NN-TRNG/GEN1C Training — General Product This class provides one day (8 hours) of general BVE, DVS, or DME training at the customers location. The class is limited to 3 students, and is a pre-requisite for any additional DME training.
  • Page 37: Order Guides

    Title: Instructions Two Request Forms are provided on the following pages — one for DME-3000 and one for DME-7000. Each form includes a table of all basic and optional DME components. Use the appropriate table to configure the customer’s optimum system.
  • Page 38: Dme-3000 Request Form

    Description Notes Basics DME-3000 Digital Multi Effects Processor Supports 2 Channels BZDM-3020 Operation Software with Manual (English) Essential to initiate DME-3000 system Control Panels BKDM-3010 DME Control Panel BKDS-7030 Key Frame Control Panel Sold as a set with BKDS-7031 BKDS-7031...
  • Page 39: Dme-7000 Request Form

    Spare Parts: Power Assembly J-6188-100-A Spare Parts: EX-394 Extender Board Training NN-TRNG/GEN1C 1 day general BVE, DVS, or DME training at the customers Includes instructor travel and location. Class limited to 3 students. accommodations. Configuration Guide • • 33 DME-3000/7000 • Product Guide...
  • Page 40: Dme Modification Kit

    SONY DME Modification Kit This section describes the kit that is used to convert a DME-3000 to a DME-7000. BKDM-3000K1 DME Modification Kit The BKDM-3000K1 DME Modification Kit provides the necessary hardware and software for converting a DME-3000 to a DME-7000.
  • Page 41: Installation Guide

    This chapter provides information and diagrams to assist with facility engineering and equipment integration requirements. The following sections are included: • The “DME-3000/7000 Control Panel” section provides detailed control panel diagrams and a table of specifications (dimensions, power, environmental and connectors).
  • Page 42: Dme-3000/7000 Control Panel

    Control Panel Specifications • Control Panel Rear View Control Panel Top View The figure below illustrates the control panel for the DME-3000/7000. The panels are identical, with the following exceptions: • The DME-3000 panel includes buttons for CH1, CH2, and Global.
  • Page 43: Control Panel External Dimensions

    Rear View Side View DME-3000/7000 External Control Panel and Cutout Dimensions Control Panel Specifications The following table lists specifications for the DME-3000 and DME-7000 control panel. All specifications are identical except where noted. DME-3000/7000 Control Panel Specifications Parameter Specification Control Panel Dimensions...
  • Page 44: Control Panel Rear View

    SONY Control Panel Rear View The figure below illustrates a rear view of the DME-3000/7000 Control Panel. SPARE MONITOR PROCESSOR DME-3000/7000 Control Panel Rear View Rear Control Panel components are listed below: 1. Spare (D-sub 9-pin), male (for Mouse or ISR) 2.
  • Page 45: Dme-3000/7000 Chassis

    Video Specifications • System Timing Requirements Chassis Front View The figure below illustrates a front view of the DME-3000/7000 chassis. The chassis front panels are identical, with the following exception: • The label DIGITAL MULTI EFFECTS DME-3000 appears on the DME-3000 front panel.
  • Page 46: Chassis Rear View

    SONY Chassis Rear View The figure below illustrates a rear view of the DME-3000/7000 chassis. The chassis rear panels are identical, with the following exception: • The DME-7000 rear panel includes a Network connector and a Terminal connector. NETWORK TERMINAL...
  • Page 47: Chassis External Dimensions

    The figure below illustrates external chassis dimensions (in millimeters): Top View Front View Side View DME-3000/7000 External Chassis Dimensions Chassis Specifications The following table lists specifications for the DME-3000 and DME-7000 chassis. All specifications are identical except where noted. DME-3000/7000 Chassis Specifications Parameter Specification Dimensions...
  • Page 48: Video Specifications

    SONY Video Specifications The following table lists video specifications for the DME-3000 and DME-7000 systems. All specifications are identical except where noted. DME-3000/7000 Input, Output, Video Specifications Specification Parameter Component System Composite System Reference video in Analog black or sync, loop-through...
  • Page 49: System Timing Requirements

    SONY System Timing Requirements The chart below shows input and output timing for the DME-3000/7000 systems. -1.5H -1.0H -0.5H 1 FRAME INPUT AUTO OUTPUT VIDEO H -0.3H +0.3H -25.03 sec +25.03 sec CENTER Four fixed positions, 0H to -1.5H OUTPUT...
  • Page 50: Dme-3000/7000 Chassis Connectors

    Power supply (+ 12V) TX-B Transmitted data (+) Common ground RX-B Received data (+) — — — — — — VD-B Transmitted VD signal (+) — — — — Frame ground 44 • • Installation Guide DME-3000/7000 • Product Guide...
  • Page 51: Rs-422A Control Panel 9-Pin

    RS-422A Editor Connector Specifications (female) Pin # Signal Function Frame ground TX-A Transmitted data (–) RX-B Received data (+) Common ground — — Common ground TX-B Transmitted data (+) RX-A Received data (–) Frame ground Installation Guide • • 45 DME-3000/7000 • Product Guide...
  • Page 52: Rs-422A Switcher Panel

    RS-422A AUX Connector Specifications (female) Pin # Signal Function Frame ground TX-A Transmitted data (–) RX-B Received data (+) Common ground — — Common ground TX-B Transmitted data (+) RX-A Received data (–) Frame ground 46 • • Installation Guide DME-3000/7000 • Product Guide...
  • Page 53: Gpi

    GPI In Com Ground GPI In 2 General-purpose input GPI In 4 Note: (Relay) GPI Out XB GPI Out XA X; 1-4 GPI outputs are also used for on-air tally functions. Installation Guide • • 47 DME-3000/7000 • Product Guide...
  • Page 54: Dme-3000/7000 Control Panel Connectors

    SONY DME-3000/7000 Control Panel Connectors The following connectors are listed in this section: • Processor • Monitor • Spare Processor The following table lists RS-422A Processor connector specifications: RS-422A Processor Connector Specifications (female) Pin # Signal Function Frame ground POWER...
  • Page 55: Monitor

    The following table lists RS-232C Spare connector specifications: RS-232C Spare Connector Specifications (male) Pin # Signal Function — — Transmitted data Received data Data terminal ready Signal ground — — Request to send — — — — Installation Guide • • 49 DME-3000/7000 • Product Guide...
  • Page 56: Dme-3000/7000 System Interconnection Chart - Video

    SONY DME-3000/7000 System Interconnection Chart — Video The simplified diagram below illustrates a typical system that includes a DME- series effects unit and a DVS-2000C switcher. Video connections only are shown. SDI Sources Reference Distribution Pulse/Test Generator Video Status Ref.
  • Page 57: Dme-3000/7000 System Interconnection Chart - Control

    SONY DME-3000/7000 System Interconnection Chart — Control The simplified diagram below illustrates a typical system that includes a DME- series effects unit and a DVS-2000C switcher. Control connections only are shown. RS-422 Serial Control DVR, DVW Series RS-422 BVE-9100 DVR, DVW Series...
  • Page 58: Dme-3000/7000 Stand Alone Configuration

    SONY DME-3000/7000 Stand Alone Configuration The simplified diagram below illustrates a typical system that includes two DME channels. Video and key sources can be provided through a wide variety of options, based on customer requirements. Video/Key/Combiner Control Display Processor DME Control Panel...
  • Page 59: Dme-3000/7000 Interconnection With Dvs-7000 Series

    SONY DME-3000/7000 Interconnection with DVS-7000 Series The simplified diagram below illustrates a typical system that includes two DME channels and a DVS-7000 series switcher. RS-422 DVS-7200 Control Panel Digital Video/Key Control DME 2 Video In DME 2 Key In Aux Bus RS-422...
  • Page 60 SONY 54 • • Installation Guide DME-3000/7000 • Product Guide...
  • Page 61: Appendix A. Feature List

    This Appendix provides a table of DME-series effects, along with brief descriptions of each. All features are cross-referenced in the index. Note that all features discussed in this section use Sony terminology. Appendix A. Feature List • • 55 DME-3000/7000 • Product Guide...
  • Page 62: Standard Effects

    SONY Standard Effects The following table lists standard effects provided on the DME-3000 and DME- 7000 systems. Standard Effects Effect Description 3-D Transform 3-D Location & Rotation Provides ability to locate the image in 3-D coordinate space, and rotate the image around the X, Y, and Z axes.
  • Page 63: Optional Effects

    Mosaic Provides the ability to break the image into tiles of variable size and aspect ratio. Optional Effects The following table lists optional effects offered on the DME-3000 and DME-7000 systems. Optional Effects Effect Description Background and Edge...
  • Page 64 Provides the ability to take the corners of an image and pull them (towards the center) into a circular shape. Panorama Allows you to stretch an image horizontally into a wide-angle panoramic view. 58 • • Appendix A. Feature List DME-3000/7000 • Product Guide...
  • Page 65 Allows you to apply a beveled edge to the image’s border, and adjust its width and aspect ratio. You can apply a light source or matte color to the bevel. Appendix A. Feature List • • 59 DME-3000/7000 • Product Guide...
  • Page 66 Assignable Frame Store The assignable frame store provided with the BKDM-7020 board can capture input or output images for use as a background, wipe border, or key border. 60 • • Appendix A. Feature List DME-3000/7000 • Product Guide...
  • Page 67: Appendix B. Related Resources

    • Audio/Video Media Printed Media Use the following printed publications for more information on the DME-series: • Refer to the DME-3000/7000 User’s Guide for a discussion of DME- 3000 and DME-7000 operating issues. P/N: 3-810-407-01 • Refer to the DME-7000 User’s Guide for a discussion of DME-7000 operating issues.
  • Page 68: Audio/Video Media

    9-967-521-02 (E1, R1) P/N: • Refer to the DME-3000 Product Brochure for an overall discussion of DME-3000 features, system configurations, and specifications. P/N: BC-00526 • Refer to the DME-7000 Product Brochure for an overall discussion of DME-7000 features, system configurations, and specifications.
  • Page 69: Appendix C. Sales And Service

    The following information is included in this Appendix: • Regional Sales Offices • Regional Service Centers • National Parts Centers • Emergency Response System • UPPORT • SOFTWARE PLUS Appendix C. Sales and Service • • 63 DME-3000/7000 • Product Guide...
  • Page 70: Regional Sales Offices

    SONY Regional Sales Offices Sony Regional Sales Offices are located in the following areas: • Northeast Regional Sales Office 123 W. Tryon Ave. Teaneck, NJ 07666 Main Number: (201) 833-5300 Fax Number: (201) 833-5850 • Southeast Regional Sales Office 3175 A. Northwoods Parkway...
  • Page 71: Regional Service Centers

    SONY Regional Service Centers Sony Regional Service Centers are located in the following areas: • Northeast Regional Service Center 123 W. Tryon Ave. Teaneck, NJ 07666 Main Number: (201) 833-5300 • Southeast Regional Service Center 3175 A. Northwoods Parkway Norcross, GA 30071 Main Number: (770) 263-8016 •...
  • Page 72: National Parts Centers

    SONY National Parts Centers Sony National Parts Centers are located in the following cities: • San Jose, CA For Broadcast parts: (800) 538-7550 • Kansas City, MO For Professional Audio parts: (800) 331-6679, (800) 654-0962 (in MO) For Business/Industrial parts: (816) 891-7550, (816) 891-7435 (after-hours) 66 •...
  • Page 73: Emergency Response System

    3. When prompted, leave your name, company, a telephone number where you can be reached, model number, and a brief description of the problem. A Sony product specialist will return your call within 60 minutes. Appendix C. Sales and Service • • 67...
  • Page 74: Supportnetsm

    Discounts on selected new and optional software products. • Automatic enrollment in SOFTWARE service program. PLUS SOFTWARE PLUS Purchasers of Sony Production Systems products are automatically enrolled into the SOFTWARE program. This service includes the following: PLUS • Notification of software releases •...
  • Page 75: Glossary

    Using chroma key as an example in a weathercast, the background is the weather map and the foreground is the weathercaster. The foreground signal is often referred to as cutting a “hole” in the background video signal. Glossary • • 69 DME-3000/7000 • Product Guide...
  • Page 76 XYZ coordinate space. Depth information can be derived from a full-screen video source, a key source, the main mask, a subsidiary mask, or by using “Z-data” from the DME-3000 or DME-7000. The feature allows you to perform visually complex keys without the need for complex masks, timelines, and repeated priority switching.
  • Page 77 M/Es will not affect the downstream key video. ™ E-File The Sony trademarked system for switcher effects memory. One E-File contains a “snapshot” of the switcher control panel, including all settings and crosspoint selections. Edit Data Page Also known as the Edit Screen, the BVE-9100’s main operating menu in which the...
  • Page 78 A switcher feature in which video from a keyer is routed to external devices (for example, a DME), and then returned to the switcher for additional processing. Sony’s term for the Effects Pathway is Processed Key. Ethernet A computerized network (and system of protocols and commands) for transferring data between electronic devices.
  • Page 79 Peripheral device Any device connected to the BVE-9100 via serial communications or GPI. Category includes VTRs, ATRs, Video Switchers, Audio Mixers, Color Correctors, DVEs, and DDRs. Glossary • • 73 DME-3000/7000 • Product Guide...
  • Page 80 #1 is next used as a source in the second cut (producing master tape #2), the original source reel timecodes are one EDL generation back. If the process is repeated again, the original numbers get farther away, but they’re not lost. If you 74 • • Glossary DME-3000/7000 • Product Guide...
  • Page 81 SONY want to assemble the show using the original source reels, the trace program is used to “recover” the original source in and outpoints. Glossary • • 75 DME-3000/7000 • Product Guide...
  • Page 83 41 effects 5 weight 41 switcher interface 10 ChromAlloy 9 Beveled Edge 59 Circle 58 BKDM-3000K1 34 Clean Defocus 14 BKDM-3010 24 Color BKDM-3020 25 background 56 BKDM-3021 25 correction 9 Index • • 77 DME-3000/7000 • Product Guide...
  • Page 84 52 Crop 17, 19, 56 system interconnection chart, control 51 Cylinder 59 system interconnection chart, video 50 user’s guide 61 DME-3000/7000/BKDM-3010 Maintenance Guide 62 DME-3000/BKDM-3010 Maintenance Guide 62 Defocus DME-3000BOX 28 blur (Key) 57 DME-7000 1 effects 8...
  • Page 85 14, 57 linear 17, 20 non-overlap, non-linear 17, 20 overlap, non-linear 17, 20 Fade 17, 19 Duality mode 7 Feature DVS-2000C/DME-3000 Pinky & Greenie 62 and benefit 3 DVS-series switchers 10 list 55 DVS-V1201 12, 29 Features per board DME-3000 17...
  • Page 86 17, 20 effects 5 Page Turn 59 LMD-1041 24 using external key 17, 20 Panorama 58 Parts 66 spare 29 Manuals 22 Pattern Select 60 Melt 59 Pause 12 80 • • Index DME-3000/7000 • Product Guide...
  • Page 87 Split 58 Rear view slide 58 chassis 40 Spot Light 17, 20, 60 control panel 38 effects 8 Recursive effects 5, 9, 14, 17, 20, 58 modifier 60 Regional pattern select 60 Index • • 81 DME-3000/7000 • Product Guide...
  • Page 88 Toolbox 4 menu 11 view control panel 36 Trail Defocus 14 Trails 9 Training 32, 33 general product 30 Twist 59 UPG-152 34 UpTime APS 68 User defined effects 10 User-DME 14 82 • • Index DME-3000/7000 • Product Guide...
  • Page 90 SONy DME-3000/7000 • Product Reference Guide Part Number BC-00584 Revision B...

This manual is also suitable for:

Dme-7000