Maintenance; Cleaning; Battery Replacement; Model Mr193 - AEMC A196-24-BK User Manual

Use only factory specified replacement parts. AEMC
for any accident, incident, or malfunction following a repair done other than by its
service center or by an approved repair center.
CAUTION: Risk of electric shock. Disconnect the instrument from any source of
electricity.

5.1 Cleaning

■ Use a soft cloth, dampened with soapy water. Rinse with a damp cloth
■ Do not use alcohol, solvents, or hydrocarbons.
■ Do not splash water directly on the instrument.

5.2 Battery Replacement

5.2.1 Model MR193

■ Disconnect the MR193 completely and turn the rotary switch to OFF.
■ Use a screwdriver to unscrew the screws and remove the battery
■ Withdraw the battery from its compartment.
■ Disconnect the old battery without pulling on the wires and replace with
■ Put the battery into its compartment.
■ Put the cover back in place and screw the screws back in.

5.2.2 Model SL261

■ Disconnect the SL261 completely and turn the rotary switch to OFF.
■ Unscrew the battery compartment screw and pull off the battery
■ Replace the battery with a new one, observing the polarity.
■ Put the cover back in place and screw the screw back in.
Current Probes & Sensors for Power Quality Meters
8.610.7664

5. MAINTENANCE

and dry rapidly with a dry cloth.
compartment cover on the backside of the unit.
a new one, observing the polarity.
compartment cover.
www.calcert.com
15
10 20
5 25
0 30
will not be held responsible
®
sales@calcert.
17