AEMC A196-24-BK User Manual page 15

For Probes:
■ Press the jaw opening lever on the probe to open the jaws.
■ Clamp the probe around the conductor to be tested. For best results, center the
conductor in the jaws of the clamp.
For AmpFlex
■ AmpFlex
■ MiniFlex
■ Clamp the sensor around the conductor to be tested. For best results, center the
conductor in the jaws of the clamp.
■ Close the sensor by pushing the moving part into the connector until it clicks.
NOTE: For details of the measurement configuration and technical specifications,
refer to the user manual of the instrument the current probe is being used with.
Current Probes & Sensors for Power Quality Meters
8.610.7664
I
and MiniFlex
® ®
: Press simultaneously on both sides of the opening connector.
®
: Press the opening device to open the flexible sensor.
®
www.calcert.com
15
10 20
5 25
0 30
Sensors:
13
sales@calcert.