Table of Contents
Advertisement
9.
Press Func then press and hold 8(rev). Press Hold to resume.
10.
To toggle modulation for a search press Hold to hold on each search.
11.
Press 7(att) then 9(mod). Press Hold to resume.
12.
To toggle Close Call modes press Hold/
13.
To review and unlock search frequencies press Func then L/O.
14.
To unlock all frequencies of all search/close call ranges Hold on any search
and press and hold L/O.
Storing a Displayed Frequency (while
searching)
To store a displayed frequency into an existing group:
1.
Quickly press E/yes.
2.
At 'Quick Freq Save?' press .no.
3.
At 'Select System' scroll to the system where you want to store the frequency
and press
E/yes.
4.
At 'Select Group' scroll to the group where you want to store the frequency
and press E/yes.
After storing the frequency, you will be at the 'Edit Channel' menu to complete the
settings for the new channel.
If you don't want to edit the channel settings or are done editing the channel, press
L/O to return to searching.
To store a displayed frequency into a 'Quick Save Group' in a 'Quick Save System',
quickly press E/yes.
At 'Quick Freq Save?' press E/yes.
The scanner will save the frequency into a (created) group called 'Qck Save Grp' in
a (created) system called 'Qck Save Cnv Sys' (with no quick key assigned) and you
will be at the 'Edit Channel' menu to complete the settings for the new channel. Then
see Edit Group Options and Edit Conventional Systems Options to customize the
group and system.
If you don't want to edit the channel settings or are done editing the channel, press
L/O to return to searching.
Note: If the frequency is already stored in the group, 'Frequency Exists'
Accept? (Y/N)' appears. Press .no to return to searching (or search hold) or E/
yes to go to the 'Edit Channel' menu.
.
101
Advertisement
Table of Contents
