Memorizing Channels And Frequencies For Scan; Wide Band Searching - Uniden UH015sx Owner's Manual

UNIDEN Model uh015sx UHF CB Radio
Operation

Memorizing Channels and Frequencies for Scan

Press and hold
/OS/GS to select
the scanning mode you wish to store
to - OS or GS. Press POL
the channel group(s) you wish to select
from - CB and/or POLICE. Turn the
rotary channel selector to select the
channel you wish to add to the OS or
GS scan memory.
POL
Press and hold /MEM to add to the scan memory of the selected scan mode.
MEM icon appears and two beeps are heard.
To remove channel from Scan Memory, press and hold
MEM icon disappears.
OS is indicated by the absence of the GS icon.
All channels and frequencies can be added to the scan memory. Initial
factory settings are:
OS scan memory - All UHF-CB frequencies and Australian Police frequencies.
GS scan memory - No channels or frequencies*.
*Scanning in GS mode cannot begin until a channel or frequency is added to the GS
y.
scan memor

Wide Band Searching

The uh015sx has a wide band search
feature which will allow you to search
Frequencies ranging from 400-512MHz
(in 12.5kHz steps). You may search the
full range (All) or search one of 4 smaller
bands separately.
400-420MHz band A
420-450MHz band b
450-470MHz band c
470-512MHz band d
400-512MHz All
Press /BAND. The search band indicator will flash for 3 seconds. While it flashes
SRCH
you may change the band search by turning the rotary knob. Search begins
automatically after 3 seconds of inactivity.
During search you may...
Press to hold search. Press
HOLD
If search stops on a frequency and you wish to continue search then turn rotary
channel selector.
If search stops on an unwanted frequency press
/MEM to set lockout ON/OFF. Press
POL
The direction of search can be changed (up or down) by turning the rotary channel
selector. To exit search, press
to activate
MENU SCAN
ENTER OS/GS
MENU
ENTER
again to resume scan.
HOLD
HOLD
to resume search.
HOLD
momentarily.
SRCH
13
SRCH MON HOLD
BAND/TSQ SQL DCS/CTCSS
POL
/MEM once more. The
SCAN SRCH MON HOLD
OS/GS BAND/TSQ SQL DCS/CTCSS
and then press and hold
POL
MEM
POL
MEM