Uniden BCD325P2-AU Owner's Manual page 26

Key
• Press Func then 9(mod) to toggle the modulation for a
conventional channel in Scan Hold Mode.
• Press Func then 9(mod) to toggle the modulation for a
trunked site in Scan Hold Mode.
• Press Func then 9(mod) to toggle the modulation for a
search/Close Call/Tone-Out in Search Mode.
• Press Func then 0(wx) to enter Weather Alert Priority
mode in Any Hold Mode.
• Press Func then press and hold 0(wx) to enter Weather
Scan mode in Any Mode except GPS.
• Press Func then 0(wx) to switch to Weather Alert in
Weather Scan Mode.
• Press Func then 0(wx) to switch to Weather Scan in
Weather Alert Mode.
• Press to cancel an error or warning message.
.no(pri)
• Press to enter a decimal point after a system number tag.
• Press before entering a 2-digit system quick key to turn on
or off in Scan Mode.
• Press to enter a decimal point for a frequency while
programming.
• Press to delete current character when editing text.
• Press twice to delete all characters when editing text.
• Press to enter a hyphen when entering an ID while
programming.
• Press to enter an 'i' when entering an 'I-Call' ID while
programming.
• Press to return to GPS Display Mode in GPS Review
Location Mode.
• Press Func then .no(pri) to toggle Priority On, Priority Plus,
Priority Off in Scan Hold Mode.
Function
26