Edit Name; Set Type - Uniden BCD325P2-AU Owner's Manual

To Edit an Existing Location press Menu.
1. Scroll to 'Program Location' and press E/yes.
2. At 'Select Type' scroll to 'POI', 'Dangerous Xing', or 'Dangerous Road' and
press E/yes.
3. Scroll to the location you want to edit and press E/yes.
4. Scroll to the options below and press E/yes.
Press Scan/Srch when editing is finished.
5.
POI

Edit Name

Set Type

Set Alert
Set LocationInfo
Set Range
Set Lockout
Delete Location
New Location
GPS Display Mode
GPS Review Location Mode
Edit Name
Name The default name is POI, DXG (dangerous crossing), DRD (dangerous road),
then YYMMDD hhmmss that indicates the year, month, date, and time if you stored
the location point with a GPS unit.
1. Scroll to 'Edit Name' and press E/yes. See Entering Text.
Set Type
If you want to change the location type, the scanner resets the available options
based on the new location type and the scanner goes back to the 'Program Location'
menu for that location.
1. Scroll to 'Set Type' and press E/yes.
2. At 'Select Type' scroll to 'POI', 'Dangerous Xing', or 'Dangerous Road' and
press E/yes to save and exit.
Dangerous Xing or Roads
Edit Name
Set Type
Set Alert Volume
Set Alert Light
Set LocationInfo
Set Heading
Set Speed Limit
Set Lockout
Delete Location
New Location
67