Uniden BCD325P2-AU Owner's Manual page 13

Close Call Temporary Store - temporarily stores and scans the last 10 Close Call
hits in the 'Hits with Scan' system.
Fire Tone-Out Standby/Tone Search - lets you set the scanner to alert you if a
two-tone sequential page is transmitted. You can set up to 10 settings (transmit
frequency, tone frequencies) then select one for standby monitoring. The scanner will
also search and display unknown tones.
Frequency/ID Auto Search and Store - the scanner can be set to automatically
store all active frequencies from a service or limit search in a conventional system
you select or automatically store all new talkgroup IDs into a trunked system you
select.
Custom Alerts - you can program your scanner to alert you when, a channel
is received, you receive a Close Call hit, a talkgroup ID is transmitted with an
emergency alert, you get close to a POI (Point of Interest)/Dangerous Road/
Dangerous Crossing, or you receive a Tone-Out hit. For each alert in the scanner,
you can select from 9 different tone patterns, 15 volume settings, and 2 blink
patterns.
Repeater Reverse - allows the scanner to try to switch to the repeater if an input
when frequency is found.
Broadcast Screen - allows the scanner to ignore hits on known broadcast
frequencies including pager frequencies in search and Close Call modes. You can
also program up to 10 custom frequency ranges that the scanner will ignore.
Text Tagging - you can name each system, site, group, channel, talkgroup
ID, custom search range, location, Tone-Out, and SAME group, using up to 16
characters per name.
SAME Weather Alert/Priority - (with programmable FIPS codes) Lets your scanner
alert you when a SAME weather alert is transmitted on a NOAA weather channel.
The scanner also displays the alert type.
Adjustable Hold (Scan) Time per System/Search - allows you to adjust the length
of time spent scanning each system or search.
PC Control/Clone - you can transfer data to and from your scanner and your
personal computer, and control the scanner using a computer.
Multi-Level Display - makes the display easy to see in dim light using three light
levels.
Signal Strength Meter - shows the signal strength for the more powerful
transmissions.
12 Service Searches - frequencies are preset in separate marine, railroad, air, CB
radio, racing, FM broadcast, public safety, military air, FRS/GMRS, news, amateur
radio, and special (itinerant) searches to make it easy to find specific transmissions.
10 Custom Searches - lets you program up to 10 custom search ranges.
13