Uniden BCD325P2-AU Owner's Manual page 23

Key
• Press to enter Function Mode for 3 seconds.
Func
• Press and hold to lock Function Mode. Press again to
unlock.
• Press to hold on a channel, frequency, search, Close Call
Hold/
hit, or Tone-Out search. Press again to resume.
• Press to hold in Band Scope Mode.
• Press to recall the last Close Call Hit in Close Call Only
Mode.
• Press and hold to hold on a system in Scan Mode. Press
and hold to resume.
• Press Func then Hold/
Close Call Priority, or Close Call Off in Any Mode except
Tone-Out.
• Press Func then press and hold Hold/
Call Only in Any Mode except GPS.
• Press to start/continue/resume scanning in Scan/GPS
Scan/Srch
Modes.
• Press Func then Scan/Srch to change from 'ID Scan' to
'ID Search' while scanning a trunking site in Scan Mode.
• Press Func then Scan/Srch to start/continue/resume
searching in Search Mode.
• Press Func then Scan/Srch to start a 'quick search' at the
current frequency while scanning a conventional system in
Scan Mode.
• Press Func then Scan/Srch to toggle 'Srch' and 'Max Hold
Search' displays in Band Scope Mode.
Function
to toggle Close Call DND,
to turn on Close
23