Auto Search And Store - Uniden BCD325P2-AU Owner's Manual

5. Repeat for any other search keys you want to program. Press L/O to exit.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Band Scope Mode

Auto Search and Store

Auto Search and Store allows you search and store frequencies from enabled
custom search ranges or a service search range into a conventional system, or new
talkgroup IDs into a trunked system. To store frequencies or talkgroup IDs you find
during Auto Store, you must first select a system where the frequencies or talkgroup
IDs will be stored. You will not hear any audio in this mode.
See Max Auto Store first to set the maximum number of hits the scanner will store.
Tip: Before you start an auto search and store, run the custom search(es) or service
search first to lock out the birdies, data, noise, etc. This will prevent the scanner from
stopping on them and doing a memory check each time it passes.
To Auto Store Conventional Frequencies, press Menu.
1. Scroll to 'Search for...' and press E/yes.
2. Scroll to 'Search and Store' and press E/yes.
3. At 'Select Store Sys' scroll to the conventional system you want to store the
frequencies in and press E/yes.
4. At 'Select Range' scroll to the 'service search' or to 'custom search' to select
where to search from and press E/yes.
Note: The quick key for the system must be turned on (if one is assigned to
the system) and not locked out to select the system to store frequencies in
otherwise you will see 'Nothing to Scan'. If no systems are programmed 'No
System Stored' appears.
When you have selected a service search or custom search range(s), the scanner
looks for active frequencies within the range(s) and 'Search and Store' appears on
the display's lower line and the system name and search range name(s) appear on
the display's upper line. When the scanner finds an active transmission, it checks to
see if the frequency has already been stored in the system ('Memory Check' in the
display). If the frequency has already been stored, the scanner continues to search.
If the frequency has not been stored, it stores the frequency into a (created) group
named 'Found Channels', then resumes searching. 'Limit Reached' will appear in the
display when the Max Auto Store value is reached.
To Auto Store IDs, press Menu.
1. Scroll to 'Search for...' and press E/yes.
2. Scroll to 'Search and Store' and press E/yes.
98