Table of Contents
Advertisement
Removing the Server from the Box
Carefully unpack the server. Save all packing materials in case the server needs to be shipped at a
later time.
Selecting a Site
The server operates reliably within normal office environmental limits. Select a site that meets
these criteria:
•
Clean and relatively free of excess dust.
•
Well-ventilated and away from sources of heat, with the ventilating openings on the server kept
free of obstructions.
•
Away from sources of vibration or physical shock.
•
Isolated from strong electromagnetic fields and noise caused by electrical devices such as
elevators, copy machines, air conditioners, large fans, large electric motors, radio and TV
transmitters, and high-frequency security devices.
For AC-powered servers:
•
Place the server near a properly earthed, grounded, three-pronged power outlet.
In the United States and Canada: a NEMA-compliant, 110-125 V outlet rated for 20 amps.
In other geographic areas: a properly earthed, grounded outlet in accordance with the local
electrical authorities and electrical code of the region.
For DC-powered servers:
•
Place the server near a -48 to -60 V DC supply.
•
Verify that proper DC grounding is provided.
•
Verify that proper insulation protects the DC connection terminals and wires.
CAUTION, ESD precautions
Electrostatic discharge (ESD) can damage disk drives, add-in boards, and
other parts. This server can withstand normal levels of environmental ESD.
However, we recommend doing all procedures in this guide only at an
ESD-protected workstation. If one is not available, you can provide some
ESD protection by wearing an anti-static wrist strap attached to chassis
ground of the server when handling components (e.g. any unpainted metal
surface).
CAUTION, Use grounded outlet
Make sure that the power service connection is through a properly grounded
outlet.
Intel TSRMT2 Carrier/Industrial Grade Server
Quick Start Guide
9
Advertisement
Table of Contents
