Table of Contents
Advertisement
64 kbps (kilobits per second). The parameters are separated by a -.
For example, 30-60 means the add threshold is 60 kbps and
subtract threshold is 30 kbps. The Prestige will perform bandwidth
on demand only if it initiates the call. Addition and subtraction are
based on the value set in the BOD Calculation field. If this field is
set to Transmit or Receive, then traffic in either direction will be
calculated to determine if a link should be added or dropped.
Transmit will only use outgoing traffic to make this determination,
and Receive will only use incoming traffic to make this
determination.
If, after making the call to bring up a second channel, the second
channel does not succeed in joining the Multilink Protocol bundle
(because the remote device does not recognize the second call as
coming from the same device), the Prestige will hang up the second
channel and continue with the first channel alone.
Editing PPP Options
Figure 5-3 Remote Node PPP Options
1. Encapsulation - Select CCP (Compression Control Protocol)
for the PPP or MP link. There are two options in this field.
Standard PPP - Standard PPP options will be used.
Remote Node Configuration 57
Advertisement
Table of Contents
