ZyXEL Communications PRESTIGE 128 User Manual page 114

Yes - filter match only established TCP connections.
No - filter match both initial and established TCP
connections .
13. More - In this field, you can determine if you want to pass the
packet through the next filter rule before an action is taken.
There are two options for this field:
Yes.
No.
If More is Yes, then Action Matched and Action Not Matched
will be N/A.
14. Log - In this field, you can determine if you wish to log the
results of packets attempting to pass the filter rule. These
results will be displayed on the System Log (see Chapter 14).
There are 4 options for this field:
None - No packets will be logged.
Action Matched - Only packets that match the rule
parameters will be logged.
Action Not Matched - Only packets that do not match the
rule parameters will be logged.
Both - All packets will be logged.
15. Action Matched - If the conditions for the filter rule are met,
you can specify what to do with the packet. There are three
options for this field:
Check Next Rule .
Forward.
Drop.
16. Action Not Matched - If the conditions for the filter rule are
not met, you can specify what to do with the packet. There are
three options for this field:
Filter Configuration 101