ZyXEL Communications PRESTIGE 128 User Manual page 68

Options. For more information on filling out this screen, refer to
the chapter pertaining to your specific protocol.
17. Telco Options: Transfer Rate - This field (which only applies
to outgoing calls) controls the rate at which the data is
transferred between your Prestige and the Remote Node. The
options for this field are:
64K - The Prestige will place 64Kbps (bits per second)
digital data calls.
56K - (For North America only) The Prestige will place
56Kbps digital data calls.
DOVBS - (For North America only) The Prestige will place
56Kbps Data Over Voice Bearer Service (DOVBS) call.
Some phone companies in North America charge less if
calls are made with DOVBS option.
18. Telco Options: Allocated Budget (min) - This field will set a
budget outgoing call time for the Remote Node. The default for
this field is 0 for no budget control.
19. Telco Options: Period (hr) - This field will set the time
interval to reset the above outgoing call budget control.
20. Session Option: Input Filter Sets, Output Filter Sets and
Call Filter Sets - In these fields, select which filter set(s) you
would like to implement to filter the incoming and outgoing
traffic between this Remote Node and the Prestige. You can
choose from 12 different filter sets. In addition, you can link up
to 4 filter sets together for further customization (e.g., 1, 5, 9,
12). Note that spaces and , are accepted in this field.
For more information on customizing your filter sets, see
Chapter 10. The default is blank, i.e., no filters defined.
21. Session Option: Idle Timeout (sec) - This value specifies the
number of idle seconds that elapses before the Remote Node is
automatically disconnected. Idle seconds is the period of time
Remote Node Configuration 55