ZyXEL Communications PRESTIGE 128 User Manual page 125

The fields in the System Security - External Server menu are as
follows:
1. Active - Determines whether the external security facility is
2. Type - Determines the type of the external authentication
3. Server Address - The IP address of your network's UNIX-
4. Port # - The IP port address used by the authentication server.
5. Key - A "password" used to identify the Prestige as a valid
The Key password should be stored in the client file in the
RADIUS server's /etc/raddb directory. Lines of the form
112 System Security
This will bring you to Menu 23.2 - System Security - External
Server.
Figure 12-1 Menu 23.2 - System Security - External Server
enabled. If this field contains No, only the built-in dial-up user
list will be used. If this field contains Yes, the built-in dial-up
user list will be searched first, then the external authentication
server.
server. At present only the RADIUS type is supported.
based RADIUS server.
The default value of 1645 should be used.
client of the RADIUS authentication service.