ZyXEL Communications PRESTIGE 128 User Manual page 96

1. Route - Make sure IPX is among the protocols in the Route
field.
2. Edit IP/IPX/Bridge - Press the space bar to change it to Yes
and press Enter to go to the network layer options menu.
Figure 8-4 Menu 14.1 - Edit Dial-in User
3. Dial-On-Query - This field is necessary for the Prestige on the
client side LAN. When set to Yes, any Get Service SAP or RIP
broadcasts coming from the LAN will trigger the Prestige to
make a call to that Remote Node. If it is set to No, the Prestige
will not make the outgoing call.
4. Rem LAN Net # - In this field, enter the internal network
number of the NetWare server on the remote side LAN. The
Prestige will create a route to access this server.
5. My WAN Net # - In this field, you can enter in the WAN
network number of the device that you are connecting to. This
number will be used for negotiation between the Prestige and
the remote device. If you leave this field as 00000000, the
Prestige will select the greater WAN network number between
the two devices.
Novell IPX Configuration 83