ZyXEL Communications PRESTIGE 128 User Manual page 65

3. Call Direction - If this parameter is set to Both, the Prestige
4. Incoming: Rem Node Login Name - Enter the login name that
5. Incoming: Rem Node Password - Enter the password used
6. Incoming: Rem CLID - This field is active only if Call
7. Incoming: Call Back - This field will be valid only if Call
52 Remote Node Configuration
operation of the Prestige, even though it is still kept in the
database, and can be activated in the future. Deactivated nodes
are displayed with a - (minus sign) at the beginning of the
name in Menu 11.
can both place and receive calls to/from this Remote Node. If
set to Incoming, the Prestige will not place a call to this Remote
Node. If set to Outgoing, the Prestige will drop any call from
this Remote Node.
Several other fields in this menu depend on this parameter. For
example, in order to enable Call Back, the Call Direction must
be Both.
this Remote Node will use when it calls into the Prestige. The
login name in this field combined with the Rem Node Password
will be used to authenticate the incoming calls from this node.
when this Remote Node calls into the Prestige.
Direction is either Both or Incoming. Otherwise, an N/A
appears in the field. This is the Calling Line ID (the telephone
number of the calling party) of this Remote Node. If you enable
the CLID Authen field in Menu 13 - Default Dial In, the
Prestige will check this number against the CLID in the
incoming call. If they do not match and the CLID Authen is
Required, then the Prestige will reject the call.
Direction is Both. Otherwise, an N/A appears in the field. This
field determines whether or not you wish the Prestige to call
back after receiving a call from this Remote Node. If this
option is enabled, the Prestige will disconnect the initial call