ZyXEL Communications PRESTIGE 128 User Manual page 77

3. PPP Options: Mutual Authen. - Some vendors, e.g. Cisco,
4. PAP Login - This field will only be enabled if the Mutual
5. PAP Password - This field will only be enabled if the Mutual
6. Multiple Link Options: Max Trans Rate - Enter the
7. Callback Budget Management: Allocated Budget (min) -
8. Callback Budget Management: Period (hr) - This field will
9. Dial-In IP Address Supplied By: Dial-in User - If set to Yes,
64 Dial-In Configuration
None - No authentication required.
implement a type of mutual authentication. That is, the node
that initiates the call will request a user name and password
from the far end that they are dialing to. If the Remote Node
that is dialing in implements this type of authentication, set this
field to Yes.
Authen. field is set to Yes. Enter in the login name to be used
to respond to the far end's PAP authentication request. This
field does not apply to CHAP authentication.
Authen. field is set to Yes. Enter in the PAP password to be
used to respond to the far end's authentication request. This
field does not apply to CHAP authentication.
maximum data transfer rate between your Prestige and the
Remote Dial-in User. The unit is in bits per second. There are
two options for this field:
64 - At most, one B channel will be used.
128 - A maximum of two channels can be used.
When the Prestige calls back to the Remote Dial-in User the
maximum data transfer rate is always 64.
This field will set a budget callback time for all the Remote
Dial-in Users. The default for this field is 0 for no budget
control.
set the time interval to reset the above callback budget control.
it tells the Prestige to allow a remote host to specify its own IP