Figure 16-5 Adding/Editing Source And Destination Addresses; Table 16-4 Adding/Editing Source And Destination Addresses - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

16.5.2 Source and Destination Addresses
To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To edit an
existing source or destination address, select it from the box and click SrcEdit or DestEdit from the previous
screen. Either action displays the following screen.

Figure 16-5 Adding/Editing Source and Destination Addresses

Table 16-4 Adding/Editing Source and Destination Addresses

FIELD
Address Type
Start IP Address
End IP Address
Creating Custom Rules
Do you want your rule to apply to packets with a particular
(single) IP address, a range of IP addresses (e.g.,
192.168.1.10 to 192.169.1.50), a subnet or any IP
address? Select an option from the drop down list box
Enter the single IP address or the starting IP address in a range
here.
Enter the ending IP address in a range here.
DESCRIPTION
ZyWALL 2 and ZyWALL 2WE
OPTIONS
Single Address
Range Address
Subnet Address
Any Address
16-13