4.3.1
Main Menu
After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.
4.3.2
System Management Terminal Interface Summary
NO.
MENU TITLE
1
General Setup
2
WAN Setup
3
LAN Setup
4
Internet Access Setup
11
Remote Node Setup
12
Static Routing Setup
15
NAT Setup
21
Filter and Firewall Setup
22
SNMP Configuration
Introducing the SMT
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ZyWALL 2WE Main Menu
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Enter Menu Selection Number:
Figure 4-3 Main Menu (ZyWALL 2WE)
Table 4-1 Main Menu Summary
Use this menu to set up dynamic DNS and administrative information.
Use this menu to clone a MAC address from a computer on your LAN.
Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings and configure the wireless LAN port (not available on all models).
Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
Configure IP static routes in this menu.
Use this menu to configure Network Address Translation.
Configure filters, activate/deactivate the firewall and view the firewall log.
Use this menu to configure SNMP-related parameters.
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
FUNCTION
ZyWALL 2 and ZyWALL 2WE
4-3