Displaying Logs; Log Command Example - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

ZyWALL 2 and ZyWALL 2WE
LOG CATEGORIES
attack
error
ike
ipsec
javablocked
mten
upnp
urlblocked
urlforward
Use 0 to not record logs for that category,
alerts for that category, and
Use the sys logs save command to store the settings in the ZyWALL (you must do this in order to
record logs).
Use the sys logs display command to show all of the logs in the ZyWALL's log.
Use the sys logs category display command to show the log settings for all of the log categories.
Use the sys logs display [log category] command to show the logs in an individual ZyWALL
log category.
Use the sys logs clear command to erase all of the ZyWALL's logs.

Log Command Example

This example shows how to set the ZyWALL to record the access logs and alerts and then view the results.
ras> sys logs load
ras> sys logs category access 3
ras> sys logs save
ras> sys logs display access
86
Chart Q-13 Log Categories and Available Settings
3 to record both logs and alerts for that category.

Displaying Logs

AVAILABLE PARAMETERS
0, 1, 2, 3
0, 1, 2, 3
0, 1, 2, 3
0, 1, 2, 3
0, 1, 2, 3
0, 1
0, 1
0, 1, 2, 3
0, 1
1 to record only logs for that category, 2 to record only
Log Descriptions