ZyXEL Communications ZyXEL ZyWALL 2WE User Manual page 128

ZyWALL 2 and ZyWALL 2WE
up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current
set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6
becomes rule 5 and old rule 7 becomes rule 6.
FIELD
Set Name Enter a name for this set of rules. This is a required field. If this field is left
blank, the entire set will be deleted.
Action The default is Edit. Edit means you want to edit a selected rule (see
following field). Insert Before means to insert a rule before the rule selected.
The rules after the selected rule will then be moved down by one rule. Delete
means to delete the selected rule and then all the rules after the selected one
will be advanced one rule. None disables the Select Rule item.
Select When you choose Edit, Insert Before or Delete in the previous field the
Rule cursor jumps to this field to allow you to select the rule to apply the action in
question.
You must press [ENTER] at the bottom of the screen to save the whole set. You
must do this again if you make any changes to the set – including deleting a rule.
No changes to the set take place until this action is taken.
Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 -
Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and
Global Start/End IPs.
An IP End address must be numerically greater than its corresponding IP Start
12-12
Table 12-5 Fields in Menu 15.1.1
DESCRIPTION
address.
EXAMPLE
NAT_SET
Edit
1
NAT