FIELD
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
5.4.1
Configuring Dynamic DNS
To configure Dynamic DNS, go to Menu 1: General Setup and press [SPACE BAR] to select Yes in the
Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS (shown next).
Service Provider= WWW.DynDNS.ORG
Active= Yes
DDNSType= DynamicDNS
Host1=
Host2=
Host3=
EMAIL=
USER=
Password= ********
Enable Wildcard= No
Offline= N/A
Edit Update IP Address:
Use Server Detected IP= Yes
User Specified IP Addr=No
IP Address=N/A
Follow the instructions in the next table to configure Dynamic DNS parameters.
FIELD
Service Provider This is the name of your Dynamic DNS service provider.
Active
Press [SPACE BAR] to select Yes and then press [ENTER] to
make dynamic DNS active.
SMT Menu 1 – General Setup
Table 5-1 General Setup Menu Field
DESCRIPTION
Menu 1.1 - Configure Dynamic DNS
Press ENTER to confirm or ESC to cancel:
Figure 5-2 Configure Dynamic DNS
Table 5-2 Configure Dynamic DNS Menu Fields
DESCRIPTION
ZyWALL 2 and ZyWALL 2WE
EXAMPLE
EXAMPLE
WWW.DynDNS.ORG
(default)
Yes
5-3