Figure 10-4 Menu 11.1: Remote Node Profile For Pptp Encapsulation; Table 10-3 Fields In Menu 11.1 (Pptp Encapsulation) - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

ZyWALL 2 and ZyWALL 2WE
Table 10-2 Fields in Menu 11.1 (PPPoE Encapsulation Specific)
FIELD
Session Type the length of idle time (when there is no traffic from the ZyWALL to
Options the remote node) in seconds that can elapse before the ZyWALL
automatically disconnects the PPPoE connection. This option only
Idle Timeout
applies when the ZyWALL initiates the call.
10.3.3 PPTP Encapsulation
If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen. Please see the
appendices for information on PPTP.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPTP
Service Type= Standard
Service Name=N/A
Outgoing=
My Login=
My Password= ********
Authen= CHAP/PAP
PPTP :
Press Space Bar to Toggle.

Figure 10-4 Menu 11.1: Remote Node Profile for PPTP Encapsulation

The next table shows how to configure fields in menu 11.1 not previously discussed above.
FIELD
Encapsulation
10-6
Menu 11.1 - Remote Node Profile
My IP Addr=
My IP Mask=
Server IP Addr=
Connection ID/Name=
Press ENTER to Confirm or ESC to Cancel:

Table 10-3 Fields in Menu 11.1 (PPTP Encapsulation)

Press [SPACE BAR] and then [ENTER] to select PPTP. You must
also go to menu 11.3 to check the IP Address setting once you
have selected the encapsulation method.
DESCRIPTION
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules=
Nailed-up Connections=
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
DESCRIPTION
EXAMPLE
100
seconds
(default)
EXAMPLE
PPTP
Remote Node Setup