Figure 24-2 Menu 24.11 - Remote Management Control; Table 24-1 Menu 24.11 - Remote Management Control - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

When you Choose WAN only or ALL (LAN & WAN), you still need to configure a
To disable remote management of a service, select Disable in the corresponding Server Access field.
Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.
TELNET Server:
FTP Server:
Web Server:
SNMP Service:
DNS Service:
Table 24-1 Menu 24.11 – Remote Management Control
FIELD
Telnet Server Each of these read-only labels denotes a service that you may use to
FTP Server remotely manage the ZyWALL.
Web Server
SNMP Service
DNS Service
Server Port This field shows the port number for the remote management service.
Except for DNS service, you may change the port number for a service
if needed, but you must use the same port number to use that service
for remote management.
Server Access Select the access interface (if any) by pressing [SPACE BAR], then
[ENTER] to choose from: LAN only, WAN only, ALL or Disable.
Remote Management
LAN only,
firewall rule to allow access.
Menu 24.11 - Remote Management Control
Port = 23
Secured Client IP = 0.0.0.0
Port = 21
Secured Client IP = 0.0.0.0
Port = 80
Secured Client IP = 0.0.0.0
Port = 161
Secured Client IP = 0.0.0.0
Port = 53
Secured Client IP = 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
Figure 24-2 Menu 24.11 – Remote Management Control
Neither (Disable).
Access = LAN only
Access = LAN only
Access = LAN only
Access = LAN only
Access = LAN only
DESCRIPTION
ZyWALL 2 and ZyWALL 2WE
EXAMPLE
LAN Only
(default)
23
24-3