Table 10-2 Fields In Menu 11.1 (Pppoe Encapsulation Specific) - ZyXEL Communications ZyXEL ZyWALL 2WE User Manual

Zyxel internet security gateway user's guide
Hide thumbs Also See for ZyXEL ZyWALL 2WE:
Table of Contents

Advertisement

Metric
The metric sets the priority for the ZyWALL's routes to the Internet. If the two routes have the same metric,
the ZyWALL uses the following pre-defined priorities:
1. Normal route: designated by the ISP (see Remote Node Setup chapter) or a static route (see the IP Static
Route Setup chapter)
2. Traffic-redirect route (see the Remote Node Setup chapter)
For example, if the normal route has a metric of "1" and the traffic-redirect route has a metric of "2", then
the normal route acts as the primary default route. If the normal route fails to connect to the Internet, the
ZyWALL tries the traffic-redirect route next
If you want the traffic redirect route to take first priority over the normal route, all you need to do is set the
traffic redirect route's metric to "1" and the normal route to "2" (or greater).

Table 10-2 Fields in Menu 11.1 (PPPoE Encapsulation Specific)

FIELD
Authen
This field sets the authentication protocol used for outgoing calls.
Options for this field are:
CHAP/PAP - Your ZyWALL will accept either CHAP or PAP when
requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
Telco Option
Allocated
The field sets a ceiling for outgoing call time for this remote node. The
Budget
default for this field is 0 meaning no budget control.
Period(hr)
This field is the time period that the budget should be reset. For
example, if we are allowed to call this remote node for a maximum of 10
minutes every hour, then the Allocated Budget is (10 minutes) and the
Period(hr) is 1 (hour).
Schedules
You can apply up to four schedule sets here. For more details please
refer to the Call Schedule Setup chapter.
Nailed-Up
This field specifies if you want to make the connection to this remote
Connection
node a nailed-up connection. More details are given earlier in this
section.
Remote Node Setup
DESCRIPTION
ZyWALL 2 and ZyWALL 2WE
EXAMPLE
CHAP/PAP
(default)
(default)
(default)
0
0
No
10-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall 2

Table of Contents