Figure 16-5 Adding/Editing Source & Destination Addresses; Table 16-4 Adding/Editing Source & Destination Addresses - ZyXEL Communications ZyWALL 10 User Manual

Figure 16-5 Adding/Editing Source & Destination Addresses
Table 16-4 Adding/Editing Source & Destination Addresses
Field
Address Type
Start IP Address
End IP Address
Subnet Mask
Creating Custom Rules
Do you want your rule to apply to packets with a particular
(single) IP, a range of IP addresses (e.g., 192.168.1.10 to
192.169.1.50), a subnet or any IP address? Select an option
from the drop down list box
Enter the single IP address or the starting IP address in a range
here.
Enter the ending IP address in a range here.
Enter the Subnet Mask here, if applicable.
ZyWALL 10 Internet Security Gateway
Description Option
Single Address
Range Address
Subnet Address
Any Address
16-11