Table of Contents
Advertisement
2.1.2
Mini-PCIe & M.2 Cards
1. Locate the mini-PCIe or M.2 slot inside the device.
2. Align the key of the mini-PCIe card to the mini-PCIe interface, and insert
the card slantwise. (Insert the M.2 card in the same way.)
3. Push the mini-PCIe card down and fix it with the an M2 screw. (Fix the M.2
network card with an M3 screw.)
Mini PCIe:
M.2:
2.1.3
WiFi / 3G / 4G Antenna Installation
Thread the WiFi / 3G / 4G antenna extension cable through an antenna hole of
the front I/O cover and fasten the antenna as shown below. Then apply
adhesive to the edge of the hex nut behind the front I/O cover to prevent the
extension cable from falling if the cable becomes loose.
1. Thread and fasten the hex nut and the
washer. Then install the antenna.
Info: The diameter of the nut is around 6.35 mm (0.25"-36UNC).
SI-324 User Manual
Hardware Configuration
2
2. Apply adhesive around here.
11
Advertisement
Table of Contents
