Table of Contents
Advertisement
2. Remove 3 brass standoffs indicated by red circles and 3 screws indicated
by blue circles to free up the motherbard.
2.1.1
Memory
To install the modules, locate the memory slot on the motherboard and
perform the following steps:
1. Press the ejector tab of the memory slot down and outwards with your
fingertips.
2. Hold the memory module and align the key of the module with that on the
memory slot.
3. Gently push the module in an upright position unitl the ejector tabs of the
memory slot close to hold the module in place when the module touches
the bottom of the slot.
To remove the module, press the ejector tabs outwards with your fintertips to
eject the module.
10
SI-324 User Manual
Advertisement
Table of Contents
