B
N
S
ASIC
ETWORK
ETTINGS
6.1.2 Configuring LAN
Configure the wired network settings in the LAN section. The router's IP is defined in the IP Address field. The default set-
ting of the DHCP server is set to enabled so that network clients can be automatically assigned a virtual IP addresses.
Advanced users may configure DNS server settings to meet specific requirements. Changing the settings in this section are
not necessary for most situations.
Note:
Keep the default values if you are uncertain of the settings values.
LAN IP
IP Address
Configure the router's LAN IP address.
IP Subnet Mask
Configure the router's LAN Subnet Mask
802.1d Spanning Tree
is disabled by default. When enabled, the spanning tree pro-
tocol is applied to prevent network loops (transmissions
won't pass the same node twice to reach the destination).
ESR600H/ESR750H
The 802.1d Spanning Tree settings
6-5
C
ONFIGURING
\
U
SER
LAN
G
UIDE