W
S
IRELESS
ERVICES
Installation of a USB Device Driver
Some USB devices, like printers or multifunction printers (MFPs), require installing a vendor-supplied driver. For USB devices
that do not need to a driver installed, skip this section.
To install a USB device driver, do the following:
1. Insert the CDROM into the CDROM drive and run the "autorun" program.
2. Follow the instructions of the installation program to install driver.
3. When the installation program prompts to plug-in the USB device, run the Control Center.
4. In the Control Center, click the USB device server that has the USB device attached.
5. Click the USB device as in the following figure.
6. Click Connect. The message Manually Connect by your_computer_name is shown, as the following figure.
ESR600H/ESR750H
7-3
USB O
IP
VER
U
M
SER
ANUAL