Configuring L2Tp; Wan Interface Settings; Dynamic Ip Address - EnGenius X-TRA ESR600H Manual

B N S
ASIC ETWORK ETTINGS

6.2.6 Configuring L2TP

The layer 2 tunneling protocol (L2TP) is used in association with virtual private networks (VPNs). There a two parts to a L2TP
connection: the WAN interface settings and the L2TP settings.

WAN Interface Settings

Dynamic IP Address

WAN Interface Type

assign an IP address provided by an ISP.
Hostname Enter a host name of an ISP (optional).

Clone MAC Enter the MAC address of the devices' net-

work interface card (NIC) in the MAC address field and
click Clone MAC.
Note:
Some ISP providers require registering the MAC
address of the network interface card (NIC) connected
directly to the cable or DSL modem. Clone MAC
masks the router's MAC address with the MAC
address of the device's NIC.
ESR600H/ESR750H
Select Dynamic IP Address to
6-22
C L2TP
ONFIGURING
U G
SER UIDE