Connecting Network Cables - EnGenius X-TRA ESR600H Manual

E G Q S
N ENIUS UICK TART

3.2 Connecting Network Cables

CAUTION!
!
Unplug all peripherals and the router's adapter before starting with this procedure.
1. Connect the adapter cable to an electrical outlet.
Note:
The Power LED lights up to show the device is active.
2. Plug one end of the Ethernet cable (1) into the WAN port
on the back panel of the router. Plug the other end of the
cable into the cable or DSL modem.
ESR600H/ESR750H
Power LED
3-3
C N C
ONNECTING ETWORK ABLES
U G
SER UIDE